Dragon origami tutorial

The dragon origami tutorial is as follows:

Preparation materials: a blue (whatever color you like) square of paper.

1, along the diagonal of the square folded once, each side along the diagonal as a reference to fold inward.

2. After folding inward, fold the remaining small triangles to the opposite side.

3, folded after this look. Open it all up again.

4. Fold inwards as shown, overlapping the point at the bottom left corner of the top triangle.

5. Fold the adjacent side on the left, also overlapping the point of the lower right corner of the top right triangle.

6, fold the previous step and then open it all the way.

7. Press the creases from the two steps you just folded and the corners at the junction into a small square like this.

8. Reverse the process and fold the sides of the small square inward on the diagonal.

9. Then reverse the process and open up all the ones you just folded.

10, follow the crease just folded inward, as shown in the picture.

11, and then the other end of the corner also folded inward, the excess part of the pressure to the inside.

12, folded after the presentation of this look, look carefully, usually not wrong.

13, the next step is to fold the T. rex head, small square to the diagonal as the center of the inward fold.

14, the folded creases pressed into this shape.

15, the other head is also folded inward with the diagonal as the center, and then press the crease inward, each side of the above treatment, folded like this.

16.Fold that corner in the center upward and then downward, flush with the corner of the small triangle.

17.This is a crucial step, pull the corner that looks like a small wing to the top of the T. rex's head, and then fold the excess inward.

18, both sides are handled in this way, after folding is like this.

19, after folding the previous step, then fold in half.

20, the triangles near the head are folded outward separately, which look like small wings, but are actually the forelimbs of the T. rex.

21.Fold the back legs of the T. rex in the direction of the front limbs, as shown in the picture.

22, and then fold out the head of the T. rex, similar to the head of the crane folding method, and then turn out its mouth.

23, then fold its forelimbs, fold, and then press the crease pressed in. T. rex mouth under the thing should also be folded up and then hand pinch, so that the whole look more vivid.

24, folded well is the picture, is pressing the crease pressed in.

25, the following is to fold the tail of the T. rex, as shown in the picture.

26, then fold the forelimbs of the T. rex, fold outward.

27. Fold inwards again according to the fold, as shown in the picture.

28. Fold the T. rex's feet in the shape of the mouth, and flatten the corners to make them look better.

29, and finally deal with the tail of the T. rex, just folded the tail of the place edge upward, so that the T. rex can stand up steadily. There are two ways to deal with the tail, see which one looks better.