How to dismantle the logistics wooden box, without tools at hand?

You can let the cargo stand at the cargo stand to help you disassemble it. If you don't have tools at home, you can find a thick wooden stick, insert it at the joint between the wooden strips and pry it hard. Wear gloves when disassembling, and be careful not to stick the wooden thorn in your hand.

It is better to have tools: screwdriver, hammer and gloves. This is faster and easier.

1. Insert the flat mouth of the screwdriver into the joint of the wood strip. If the nail is tight, you can knock the screwdriver in with a hammer;

2. Insert the flat mouth of the screwdriver into the joint of the wood strip. If the nail is tight, you can drive the screwdriver in with a hammer.

3. Pry open the screwdriver to loosen the nail nailed on the batten, and then break the batten forcibly.

Extended data:

1, logistics turnover box, referred to as logistics box or turnover box, is widely used in machinery, automobiles, household appliances, light industry, electronics and other industries. Acid-resistant, alkali-resistant, oil-resistant, non-toxic and tasteless, and can be used to hold food. Convenient cleaning, convenient parts turnover, neat stacking and easy management. It is suitable for transportation, distribution, warehousing and distribution processing in factory logistics.

2, with bending, aging, bearing strength, tension, compression, tear, high temperature combination atlas? , rich in color, made into turnover box mold. Box-type turnover box can be used for both turnover and finished product delivery packaging, which is light and durable and can be stacked. Various specifications and sizes can be customized according to users' needs. Aluminum alloy can be covered, dustproof and elegant.

3. The difference between the new logistics turnover box and the traditional logistics turnover box is that the functional design is more perfect; The industry is more targeted; Single box and stack have higher bearing capacity and longer service life. The product size error of the new logistics turnover box is 3%, the deformation rate of the side wall is not more than 65438 0%, the plane deformation of the box bottom is not more than 5mm, and the diagonal change rate in the box is not more than 65438 0%, all of which are within the allowable range of enterprise standards.

4. Plastic logistics box. The plastic turnover box is made of high impact strength HDPE (low pressure high density polyethylene) and PP (polypropylene) by injection molding. Plastic logistics box is widely used, which is convenient for parts turnover, neatly stacked and easy to manage. Its reasonable design and excellent quality are suitable for transportation, distribution, warehousing, distribution and processing in factory logistics.