Doctor's Splint Binding Skills

Operating steps 1. External use: after the fracture is reduced by manipulation, apply detumescence ointment on the fracture. The scope of application is larger, especially for fractures near joints, which should include some limbs at the distal end of joints and then be loosely wrapped with bandages. 2-3.2. Placement of pressure pad: accurately place the selected pressure pad on the appropriate part of the limb and fix it with adhesive tape; Placing splint: according to the specific requirements of each fracture, place splint in turn and hold it by assistant for fixation. 3. Tie the cloth belt: * * four times. Tie the middle two first, and then tie the proximal and distal ends. Tie each bundle for two weeks and tie it with a slipknot. Use your hands evenly when binding. Usage 1 Short oblique fracture of humeral shaft with angular displacement was corrected and fixed with small splint and pressure pad after reduction. Secondly, after the reduction of ulnar and radial fractures, a bone separation pressure pad can be placed at the interosseous fascia on the dorsal metacarpal side of the fracture to make the interosseous fascia open and keep tense, so as to prevent the fracture ends from approaching. After the small splint is fixed, the forearm is placed in the middle position of pronation and supination. Three, the distal radius fracture, distal fracture end to the dorsal radius displacement. After reduction, pressure pads and small splints are used to maintain the alignment of the fracture after reduction. After the small splint is fixed, the forearm is placed in the middle position of pronation and supination. Fourth, the tibia and fibula fractures are displaced after reduction, and fixed with pressure pads and small splints to maintain the counterpoint after fracture reduction. 5. Ankle valgus sprain causes bilateral ankle fracture with displacement, which can be corrected by pressing pad and small splint fixation, and the alignment of fracture ends can be maintained.