How to remove the anti-theft screw?

1. Clean the surface of the anti-theft screw first, especially the rusted part, so that it can be removed in the next step.

2. Then, we will find a crew cut screwdriver and poke it under the screw cover, mainly where the blank holder is used as a bayonet. Of course, there is still a little luck in this. If you are lucky, you can just pick one or two bayonets. Then put your hand into the loose gap and pry it out with a little force, and you can pry the lid open.

Finally, insert the screwdriver directly into the hole and unscrew the screw, and you're done.

Extended data:

If you can't pry it open with a screwdriver, you need to use a vice. First, make sure that the license plate screws are tightened, then clamp the shell of the license plate anti-theft cap with pliers, keep the angle parallel to the license plate, turn it counterclockwise, and loosen the original fixing screws. Then change it to the vertical angle of the license plate, and turn it counterclockwise while dialing hard until the screw is completely unscrewed.