Design the pattern by axial symmetry or translation.

Design the pattern by axial symmetry or translation, as shown below:

1. Determine the position of the center line: Before drawing, you need to determine the position of the center line. Normally, the center line should be in the center of the canvas, but the position can be adjusted as needed. If you want to draw an asymmetric and axisymmetric diagram, you can put the center line in different positions.

2. Draw a basic figure: Draw a basic figure on one side of the center line, and then flip it along the center line to make it completely symmetrical with the figure on the other side. When drawing basic graphics, you can use shapes such as straight lines, curves and circles, and you can also use various colors and materials to enhance the effect.

3. Use tools: When drawing an axisymmetric picture, you can use tools to help draw. For example, you can use MathTool formula editor to draw axisymmetric pictures, or you can set data to show the changes of axisymmetric pictures in detail.

nature

1, the symmetry axis is a straight line.

2. In an axisymmetric figure, the distance between the corresponding points on both sides of the axis of symmetry is equal.

3. Axisymmetric graphics, folded in half along the axis of symmetry, and completely overlapped left and right.

4. If two figures are symmetrical about a straight line, then this straight line is the line segment whose symmetry axis bisects the symmetry point vertically.

5, graphic symmetry.