What is the cold storage installation process?

Cold storage construction requires a lot of work, but most people don’t know much about its process. So what is the cold storage installation process?

1. What is the cold storage installation process?

Consultation is required before sales, and then planning of the cold storage is carried out. After both parties determine the construction plan, they can sign the contract and then bring it with them. The equipment enters the construction site for construction. After the construction is completed, it will be accepted by relevant personnel and finally handled by after-sales service.

2. What should be paid attention to in cold storage construction

1. Cold storage planning, clarify the specifications, purpose, location, goods and objects to be stored and the set temperature value of the cold storage.

2. For cold storage planning, find a cold storage builder and put forward your needs. The cold storage builder will let engineers and technicians communicate with the customer in detail and work out an appropriate plan. There will be a system in this. selection, warehouse layout, materials, facility configuration, electrical control, temperature control, etc.

3. A detailed quotation list, which includes the materials needed to build a cold storage and the prices of different materials. The total price must also be clearly marked.

3. What to do if cracks appear on the cold storage floor

1. The cold storage took a long time to build. Because of the large temperature changes, the materials will be affected by thermal expansion and contraction, causing expansion and contraction damage. , causing cracks to appear in the exterior wall and roof, and in severe cases, the insulation layer will be torn. Therefore, materials must be used according to the structure of the building, and the expansion setting must maintain a corresponding distance.

2. If the heights of adjacent buildings are very different, settlement joints must be set. This can prevent uneven settlement and cause damage to the building. The specific width of settlement joints is usually set from the roof to the foundation according to the relevant Standard, such as 20 to 30 mm joints without filling material inside, the settlement joint inside should be the same as the expansion joint, that is, it can be used as an expansion joint.

I summarize: The above is the specific process of cold storage installation. From the above article, we can see that in order to ensure the smooth installation of cold storage, the above steps must be followed during actual construction, so as to avoid a lot of trouble. Save more time and energy, hope it can help everyone.