How to make lanterns handmade children's handmade simple have good to do

Practice 1:

1, cut out a rectangular piece of cardboard, the two ends of the rectangle with a ruler and pen to draw a line one centimeter wide each, this is the top and bottom edges of the lantern.

2. On the cardboard between the two lines, use a ruler and pen to draw lines one centimeter wide, which is the skeleton part of the lantern.

3, use a knife to cut the lines drawn in the paper one by one, fold back the two lines drawn at the beginning with force, make creases and then unfold them.

4, bend the ends of the cardboard, put the two ends together, stick double-sided tape on one of the sides, glue the two ends, and then press down with your hand, you can clearly see the shape of the lantern.

Practice two:

1, the special steel wire upper and lower ends into the upper and lower two plastic seat multiple small holes, the skeleton took shape.

2, will be two rods through the just done skeleton up and down the two plastic seat of the two large holes, the size of the right size with a nail gun to fix one end of the rods and plastic seat, skeleton production is complete.

3, the fabric cut into a similar long oval piece of cloth, the piece of cloth embroidery, hot stamping or color printing out the symbol of good luck and good luck patterns, and then a few pieces of cloth with the edge of the sewing machine to tie up the good, so that the lantern set is complete.

4, the lantern set into the skeleton, and then press the skeleton down, hear "click" sound, that the lamp base has been iron rod iron pins stuck, at this time the lantern set of each piece of cloth pieces spliced together on the sewing pushed to the wire, all the steel wire according to the same distance to dial neat, the lantern has been the prototype of the first time.

5, just support up the lantern lying on the bracket with hand-operated bullion machine in the fabric on each wire with white latex on the track of the gold bars, and then dry.

6, after drying the gold bars, then in the lantern of the upper and lower seat of the gold around the auspicious cloud pattern (locally known as clouds), and then dry.

7, after the lantern is dry, use pliers to press the iron pin on the pole, the lantern will be closed. Wrap a circle of gold tape around the place where the lamp base meets the lantern sleeve, and the lantern is finished.

8, good lantern can be directly on the lower seat on the yellow whiskers is a more complete lantern, but also in the upper and lower lamp base with a large circle, the upper circle of gold laser tape, the lower circle with a circle of hydrangea, so that the palace lantern is more beautiful.

9, and then finally hang the lantern wire pressed at the top of the lamp post, a beautiful palace lantern is completed.