What tools do you need to make Melaleuca cloth shoes? Do you buy some on Taobao?

Tools (available on major shopping websites):

Crocheting: it is to hide the extra thread on the sole with crochet.

Clip: It's for pulling out needles.

Awl: awl hole, of course.

Steps:

Making paper clips is actually making cloth soles. Use a large board and paste it all around. The upper and lower floors need a whole block. You can stick several layers in the middle if you want, and each layer should be evenly stuck, but there are many layers, so it is inconvenient to accept the sole.

Move the board to a sunny and ventilated place to dry. When it is dry, start cutting the soles and two heels according to the sole pattern.

Place the cloth at a 45-degree angle and cut the edges diagonally. When the paste is finished, wrap the edge quickly, and don't wait for the paste to dry. When the edge is bent, cut a small mouth so that the edge of the wrapped shoe is flat. Beginners should try more times.

First sew a circle around the shoes, and the stitches can be bigger. This step has a sharp awl and can be completed soon.

If the novice doesn't check the soles, the stitches will definitely be messy. For the sake of beauty, check it first. Find the midpoint of your toes first. Then find the center point of the heel. Connect the two center points of toe and heel and draw a line, which is the center line of sole. Find the toe, middle and heel, draw a dotted line each, and draw a dot every 0.5 cm. Then draw a grid for the sole, each small grid is 0.5 cm long and 0.5 cm wide. Draw the toes first, then close the soles.

Cross stitch needles are used to receive soles. Cross-stitch, online Baidu, came out.

Then fill the sole with soft 8 layers of thin cotton, and then sew.

The upper part is cut according to the pattern.

Dip the 5-layer vamp with cloth-dipping glue. Every time you touch a layer of cloth, scrape it with a small box to let the air out.

After a pair of shoes are pasted, fold them together, and then cut off the extra edges of the cloth. Remember to stick a semi-circular cloth on the heel to make the heel of the shoe straighter.

The lower edge of the vamp is wrapped with white cloth, and the bread is covered with black cloth. Be careful and patient because there is a bend.

Add two "small ears" with elastic bands on both sides of the vamp, sew the small ears and vamp together on the sewing machine, fix them with a needle first, and then sew them with a big white thread to play a fixing role.

The vamp is completely finished, and the following is the sewing of the vamp and sole, which is the so-called "shoe", which is fixed with a needle first. To prevent dislocation, first fix the center of the toe cap and sew a needle. The heel should also be sewn with a needle, and then all the shoes should be fixed with a needle, and the shoes should be licked slowly.

The shoes are ready.