How does the TV connect to the cable network? Five simple steps to enjoy the movie experience.

Want to connect the TV to a cable network? Follow these simple steps and enjoy a smooth viewing experience.

Connect the network cable

Locate the cable network port on the back of the TV, plug in the cable network cable, and plug the other end into the cable network port of the router or modem.

Boot setting

Turn on the TV and make sure other devices are turned off.

Enter the setup menu.

Use the TV remote control to find and select the Settings menu. The specific location may vary according to the brand and model, and it is generally marked as "Network Settings" and "Network".

Select wired connection

In the settings menu, find and select the wired connection option, and if there are wireless and wired options, select the wired connection.

Configure network parameters

Select "Automatically obtain IP address" or "DHCP" to let the TV automatically obtain IP address and other network settings. If IP and other parameters are specified, select Manual Configuration and enter the corresponding information.

test circuit

After setting up, select "Test Connection" or similar options to ensure that the TV is successfully connected to the network. If everything is all right, the TV will display the message that the connection is successful.