What should I pay attention to in the process of using intelligent street light controller?

Setup process, in addition to the maintenance state, if no key is pressed for 30 seconds, the controller will resume the automatic working state and display the current time. Factory Settings:Default status Output-3, that is, 3-way control, the user power on the system began to work automatically, the first road in accordance with the preset control mode Mode-1 time for automatic control, the second road, the third road of the light on the same time and the first road, the second road of the light off the time preset for 3:30 a.m. The third road of the light off the time preset for 1:30 a.m.

Intelligent Street light controller adopts the most advanced foreign computer control technology, according to the law of change of the seasons of the year, the application of latitude and longitude algorithms to calculate the sunrise and sunset time, and there is a switching time fine-tuning function, to adapt to the needs of different geographic environments; it is the best time controller for the street lamps, advertising light boxes, neon lights and other equipment. Fix the street light controller on the control cabinet or control board, connect the fire wire to the phase line (A) and the zero wire to the zero line (N). Since the street light controller does not contain an internal fuse, connect a 1A fuse to the phase wire of the input terminal. Connect the output to one end of the contactor coil J1, if the relay coil voltage is 380v, you need to connect the other end of the coil J2 to a different phase line (B or C phase); if the relay coil voltage is 220v, you can directly connect the other end J2 to the zero line.

?