Traditional Culture Encyclopedia - Traditional stories - Manufacturing method of pheasant foot hanger

Manufacturing method of pheasant foot hanger

Method one

Required materials: bamboo stick, steel wire, rope, copper sleeve, bamboo stick inserted in the ground, 30 cm long steel wire.

Usage: Condoms made of bamboo sticks, steel wires and rope copper rings look very simple. Using the elasticity of the steel wire, when the pheasant's foot kicks into the semicircle formed by the steel wire and rope, the steel wire bounces, and the copper ring slides upward along the steel wire from the top of the bamboo stick, thus binding the pheasant's foot behind the rope. The length of the rope can be adjusted to adjust the response sensitivity of the whole condom. Slow-responding condoms are used for fighting. The most common method here is to run errands with quick-acting condoms. Running errands requires people's cooperation. For example, when the chicken medium goes down to the field path, the person is forty or fifty meters away from the chicken medium, under the condom, and five meters away from the chicken medium. People should pay attention when pheasants hear the cry of chicken media coming. When they see the pheasant entering the condom, they should clap their hands or cough to let the pheasant see someone, and then it will turn and kick back.

Method 2

Required materials: stick, thread, needle and thread sleeve.

Usage: Take a thin bamboo with a length of 1.20cm, the little finger is elastic, the lower end is pointed, and the upper end is knotted. Find another thin bamboo with a length of 40CM, which is elastic and slightly thinner than chopsticks. Just sharpen the ends, bend them into a semicircle and insert them into the ground. Just insert it tightly and don't be pulled up by the elastic rod. Find a pin: a 5CM long stick, No.8 wire, just tie the wire at a quarter, find the intersection, insert a stick, tie the wire at the head of the elastic bar with a splayed knot, tie it and tie a cow slipknot at 8CM, and cover it at a quarter of the pin. Just don't tie a slipknot at one end of the line, and then insert an elastic rod at a better distance.