Hand rod what is three seven tuning, four six tuning Fishing rod tuning instructions

Of course it is easy fishing tackle mall la! Fishing tackle supermarket crown seller value recommended! This article is written to involve fishing sports time is not long friends, as for the senior people, you just as passing, as long as you do not laugh at my ignorance on the good, if there is not complete place, welcome to the prawns to add, correction. Content from diaoyula.com When I first came to the Straits, I may be the same as many newcomers now, facing the professionals of the terminology confused, dizzy and did not understand. First of all, I would like to quantify a few important concepts that will be involved in this article for the majority of uninformed anglers: The so-called tuning, which refers to the main bending point of a rod's force, is usually said to be "three-seven tuning", "five-five tuning" and the rod's overall hardness can be said to be completely unrelated. Hardness can be said to be completely unrelated to the overall hardness of the rod, are two things, the first time in the fishing tackle friends are often easy to "tuning" and "hardness" mixed up. The following diagram illustrates the difference between hardness and tuning. The difference between super hard tuning, hard tuning and medium hard tuning. The so-called hardness refers to a rod's overall resistance to bending, and has nothing to do with the "3-7" or "5-5" tuning. The so-called waist strength refers to the rebound force of a rod after bending, that is, after bending in order to restore the original straight state and the force issued. The so-called strength refers to a rod's ability to resist bending, the higher the strength of the rod is not easy to break. It has nothing to do with the "hardness" of the rod, but is affected by the "tuning". It can be said that for two rods of the same hardness, the more the tuning tends to be "first", the more likely the rod will break. The main attributes of a rod are usually the above four. Some people may say that the important attributes of a rod are length, weight, first, diameter, tonnage of carbon cloth, etc. Those are just superficial parameters. Those are just superficial parameters, in fact, the above four items are the performance elements of a rod's specific depth of attraction after analyzing these parameters. For example, carbon cloth tonnage is said to be the material, the first, the yuan diameter is said to be the rod body diameter and taper, weight with reference to the diameter of the rod body can be derived from the approximate wall thin or thick wall. And according to these factors can finally analyze a rod's tuning, hardness, rebound and strength size. For more fishing knowledge, please visit Fishing La There are only a few aspects that affect the performance attributes of a fishing rod: material, diameter, taper, and wall thickness. Of course, length is also important, but when we compare two or more rods, we need to make sure that they are the same length to be comparable, so we will not consider length for the time being. First, let's talk about tuning. This term is the most important thing that we all care about when we talk about a rod, and it's also the most talked about topic. In fact, it is very simple as a concept, just refers to a rod after the fish will bend where, involving the so-called "first tune", "this tune" and "carcass tuning" concept, is nothing more than The so-called "first", "home" and "carcass" concepts are just a description of the rod's main stress point near the tip of the rod, the rod body, or the position of the handle. The main factor affecting this attribute of a rod is the taper of the rod body, which has nothing to do with the tensile strength of the carbon cloth itself, because generally speaking a rod is usually made of the same material from front to back, meaning that there is no difference in the material from front to back. It has nothing to do with the wall thickness, or even the overall thickness of the rod, but simply the taper, which is the ratio of the outer diameter of the rod before and after. We know that usually rods are thin in the front and thick in the back (similar to the DAIWA strain theory of the rod is not necessarily thinner near the tip than near the handle of the part, careful anglers if you have the opportunity to observe, such as the Kufa Tensei and other rods, it is not the thickest near the handle of the part of the rod, but rather than the first section of the first part of the first part of the slightly thinner, or no taper at all, similar to a (The "carbon tube", however, is still a thin rod in the front and thick in the back), so the rod is generally more prone to bending after a fish is caught. Cite the following figure: take the ghost WuJin and the Genbu people as an example, the ghost WuJin is the longer the softer, but the force point is more forward. 8 ~ 11 feet of ghost WuJin hardness is even slightly higher than the Genbu people, 12 ~ 15 feet of ghost WuJin hardness is lower than the Genbu people, the force point is about the same, are carcasses in favor of the local tuning, 16 ~ 18 feet of ghost WuJin is the tuning rod, but the hardness is greatly reduced. Another example: take the Genbu people with the fire compared to the Genbu people's hardness is higher, that is to say, less easy to bend, but the fire although the hardness is not outstanding, but the temperament is the first tuning rod, that is to say, it is the basic point of the bending of the force is more in front of the proverbial "quite".