Doing a bounce light cove ceiling, any good design options?

Many people's houses have installed suspended ceilings, suspended ceilings need to be installed on the ceiling slot, bounce recess on top, the ground is flat, there are a few centimeters outside the side, can not see the light, the light rises. Today we come to see how the ceiling cove is made, ceiling cove is what kind of ceiling, ceiling types are varied, but believe that people can hang.

Types of ceiling light cove

1. At present, most of the traditional light cove is constructed with gypsum and wood plywood, and the properties of the material limit a lot of craftsmanship. The decorative surface is too simplified. The traditional light table gives the feeling that it is just one more run for the lighting team

2. In recent years, some designers have tried to use new materials such as aluminum buckle plate and secondary saws to make light troughs, and the styles may be varied, but the aluminum buckle plate to plate bonding, the shape of the material is incomplete, and the surface of the aluminum buckle plate is mainly ink printing, the actual texture is not enough, and the available choices are not many. Later replaced with leather sculpture soft package material, although the surface texture up, but still lack of integrity, screening is also not many people.

3, integrated light trough can not only maintain the integrity of the entire ceiling, but also increase the actual texture of the decorative surface. Artificial pitched ores and pitched patterns combine to make the most popular decorative items these days. Feel free to mix and match any style you desire.

4. There are no limitations to the use of integrated light troughs for ceiling space. It can be installed on the already made laminate structure (called the central mode), or with aluminum buckle (called the integrated ceiling mode) to make a secondary roof, and also can be affixed to the wall cabinet (called the soft installation mode). After the product is upgraded to the 2. 0 era, it can be installed on the wall to decorate the background wall, and can also be installed on the floor to create a luminous footstool.

Construction techniques for ceiling light boxes

1, with an electric drill in the ceiling up and down the big cuts;

2, in order to fix the wood keel, in the stake eyes nailed to the fine wood stakes.

3.Use 20*20 wood to make 300*300 wood keel to fix the gypsum board.

4. To install a cave light, between 150 ~ 200, side top plasterboard etc. hang thicker, it is normal to accumulate a lot of dust. For example, if you nail the plasterboard, plasterboard will fall down, and the master clean up is not clean.

5, clean, close the ceiling side elevation, line maintenance after replacing transformers, lamp cups, etc. is not easy, or empty.

Generally speaking, determine the length and width of the light slot, a specific number, and then choose the width of the corresponding force, so that better construction. The peripheral outline of a square or rectangular ceiling is made with a carpenter's board, which is then fixed to a pre-made flat roof, and then the lower board is made with a 5-mile board, which is connected to the ceiling of a specific shape below. Between the two plates there is a space of 5-10 cm, depending on the dominant interior. The joints of the plasterboards are joined with special seam elastic putty, and then the surface is glued with "Kuron" cloth. Scrape grease, trim, apply latex paint, install the lamp holder and spotlights and you're done.