How to adjust fishing with three eyes without hook

Hook-free drift adjustment method Three-eye adjustment method is as follows:

Materials: fishing rod, string, bait, scissors.

Find the bottom with heavy lead first and test the water depth.

Don't hang the parting line in the line group, pull the float down in the direction of lead falling, and then throw it into the water. The float needs to be completely submerged and the lead drops to the bottom, so that we can know the water depth, whether the bottom is flat or not, and whether there is a slope. The floating tip is exposed to the water for five eyes, and then the water depth is calculated.

Second, pull down the float, trim the lead skin and adjust the eyes.

Pull down the float in the range of 20 ~ 30 to ensure that the float can take the lead drop out of the water. Then take out the prepared scissors, trim the lead skin, and cover it until the float can be exposed for 3 eyes.

Third, push the float up and hang the bait to find the bottom.

Hang the bait, hang the secondary line, and then throw it into the water. If you can't see the drift clearly and the information is chaotic, you can continue to push it up. Because it is adjusted to three eyes, as long as the fishing eye does not exceed three eyes, the eight-character ring will not touch the bottom.

Advantages of hook-free bleaching:

First, the hook-free drift adjustment method can accurately measure the weight of a single hook.

The mesh number displayed in the hook-free floating adjustment is the residual buoyancy after removing the weight of the plumb and the connecting ring (regardless of the waterline). When the double hook is suspended, the total weight increases and the residual buoyancy decreases, that is, the visual eye decreases, so the weight of the hook can be calculated, which cannot be measured by other calibration methods.

Second, the hook-free drift adjustment method can accurately measure the weight of a single bait.

In the process of fishing, when the fish situation changes suddenly, if the angler changes the rubbing bait to pulling bait or rubbing small bait, it will inevitably reduce the weight of the bait, and the fish tail will automatically show half an eye, one eye or even two eyes. At this time, it is very easy to change to fishing half water, unlike other calibration methods, which waste time and delay fighters.

Third, the hook-free drift adjustment method In actual fishing, the state of the double hook bait at the bottom of the water is more clear.

Double hook bait fishing, because of different fishing purposes, the state of double hook bait and sub-line at the bottom is different, but when the fishing purpose is the same, double hook bait and sub-line are at the bottom.

Knowing the weight of the hook and the bait, we catch 1 mesh, 2 mesh, 3 mesh and 4 mesh respectively, so the weight of the bottom bait is borne by the ground, 1/4, 1/2, 3/4 and the whole bottom bait respectively. At this time, the upper bait is suspended, the short sub-line is vertical, and the long sub-line is basically vertical.