How to clean a Dyson vacuum cleaner

The specific steps for cleaning a Dyson vacuum cleaner are as follows:

Tools: cold water, Dyson vacuum cleaner.

1, before cleaning, gently tap the filter to remove residual dust and debris.

2. Use only cold water to clean the filter unit, place the filter wool face down and let the cold water run through the folded filter paper.

3.Keep rinsing until the water runs clear, letting the cold water run over the inside and outside of the filter pads and gently squeezing the foam to dislodge the dirt.

4.Fill the filter with cold water, cover the ends with both hands and shake gently.

5.Repeat this step until the water is clear, gently shake the strainer to remove excess water, and leave the strainer unit for at least 24 hours to dry thoroughly.

6.Before reinstalling, check that the strainer is completely dry.To install, turn the strainer clockwise until it snaps into place.