Intelligent lifting window advantages and disadvantages

Break the wire automatic window lifter needs to break the line of the original car and change, and step by step method is more cumbersome, the need to remove the car interior panels are also more, for the owners of the car without disassembling and installing the experience of the car very unfriendly.

Because of the need to break the line, the interface of the broken line is one of the weakest places, in the work, due to the current is too large, the temperature rises, it will be easy to problems, such as wire wrapping rubber off, resulting in the wire exposed and cause a short-circuit, or even spontaneous combustion. Due to the existence of certain security risks, such automatic window lifters have gradually withdrawn from the market.

Non-breakable Automatic Window Lifter

Non-breakable Automatic Window Lifter almost dominates the automatic window lifter market due to the advantages of less safety hazards and easy installation.

Non-wired automatic window lifters can be divided into the following two forms:

The first: through the serial decoder to achieve the function of automatic window lifting, this method through the original lift circuit interface, serial connection of an automatic window lifting decoder, so as to realize the window lifting electrical signal changes. When installing, you only need to remove the interior panel at the window lift switch, and at the same time, because the upper and lower interfaces of the serial wiring harness and the original interface can be paired with each other, so it will not cause damage to the vehicle wiring harness.

The second is the common OBD automatic window lifter, which can change the window lifting program through the vehicle's OBD interface, thus realizing the function of automatic window lifting. At the same time, no need to remove any parts, do not have to change any circuits, but because it will change the car program, so there is a possibility of causing confusion in the car program (OBD for the manufacturer to provide the vehicle troubleshooting interface).

Advantages and Disadvantages of Auto Window Lifter for Cars

Most of our traditional car windows are manually opened and closed, which is neither convenient nor safe! Then, in order to know how to solve these problems, car window lifters were introduced in the market, thus solving the problems of many car owners! Next, we take a look at the quality of auto glass lifters with AutoRepairTechnology.com I. Discussed the principle, advantages and disadvantages of automotive glass lifters.

Automatic window lifters are also called automatic window closer. Under certain conditions, the window glass can be automatically lifted and closed when getting out of the car. Window lifter is the owner of the car off the car forget to close the window, and automatically for the owner to close the window, also called automatic window lifter, to prevent some forgetful owners because they forget to close the window and steal the car. Window lifter, also known as door closer, automatic door closer, automatic window lifter, automatic window lifter, automatic window lifter and so on.

Automatic window lifters work automatic window closer only works when the car key is dead, closing the window only works once. At the same time, the automatic window closer has three modes:First, after the car key is dead, take off the key, and immediately start to close the window automatically; Second, after the death of the car key, take off the car key, close the driver's door, and then automatically start to close the window; The third car key is dead, close the door and press the remote control to automatically start to close the window.

The order of closing the windows is standard: open the driver's window, the deputy open the window, the deputy open the window of the back seat, open the window of the driver's back seat in order to close in sequence. In the course of each person can also be free to choose their own, will automatically close the window control line of each window, according to the whole window to adjust the order of closing the window can be changed. Owners can choose the appropriate automatic window closing mode and window closing sequence according to their own needs.

The installation of the time-controlled automatic window closer is slightly more complicated, with about 9 wires cut, even if the installation skills of skilled technicians will take an hour to install. To begin with, the original car steering wheel under the dashboard guard and drive position door panel, from which to find a number of related wires, including the original car window central locking trigger signal line, the four windows of the control motor power line, ground, relay return line, and so on, and then one by one to strip the line and the window closer related wiring connection.

The shortcomings of this automatic window closer are also more obvious, in the case of the first window has been closed in 5 seconds in place, close the controller can not be judged, and still continue to give the window motor power supply, in this way, the motor in a long time, "overloaded operation", will be easy to have burned out of the case. Overall, this time-controlled window closer, the price is relatively cheap, but easy to burn the motor, and the failure rate is relatively high.

The advantages and disadvantages of automatic window lifter on some of the installation of automatic window lifter owners experience, we summarize the automatic window lifter in the end there is no use, is it worth installing. The classic Cruze are all unable to close the sunroof, Taobao to buy a can, 30-90 all have. Too high a price with these all the same, is a small program, inserted in the OBD on it. All things are the same, very good! No need for an external connection.

It is directly connected to the vehicle diagnostic interface, you just need to find the interface to plug the automatic window lifter. This depends on the specific model, some models do not need wiring, direct OBD plug can be, some models have the kind of free wiring, after removing the door panel directly to the original interface butt on the line, in the course of the market, most of the models are to be wired, most of the wiring: long fire wire, ACC line, lock signal line, the central motor line, etc., each car all have instructions.

Installed and tried, the feeling is actually no more than that. At the beginning, the windows are one by one to rise, the interval is not short. In fact, that time has been enough for you to raise the window in the car. If you lock the car directly away, and afraid of this thing out of order did not raise the window. Then this locking car window is four windows all to check, even if the window is closed, the motor in the door will still ring a little, that is, the window is closed, but this will still help you close again.

Compared to locking the car once, the motors of your four windows all have to be started, and it's not good for the motors for a long time, especially if you close the windows again in the closed state. In fact, after a good feeling is not very useful, and the original four windows of the car can not be compared, and there is a certain risk. I personally advise partners not to install this. Modification of the car certainly have an impact on the car, such as no anti-pinch function, every time you lock the car all have to repeat the window to accelerate the aging of the lifter and other shortcomings.

On the automatic window lifter, also almost on these often see faults, if you want to install this, I hope to make mental preparation, the reliability of these products is actually not high, most of the cases or yao to develop a good habit of shutting the window from the car. Now very many new cars all have factory automatic window lifter this function, when you buy a car can refer to.