What are the specifications of the shelves? Can you be more specific?

Structure: composed of upright posts and steel plates,

Specification: L 1500*W500*H 1500 three layers

L900*W400*H 1800？ four layers

L 1200*W600*H2000 five floors

Scope of application: it can be used for manual storage and retrieval of light goods, and can be used to store various small products with plastic turnover boxes. It is also widely used in electronic industry and small parts warehouse. By replacing plastic spraying powder or laying special rubber sheets, the anti-static function can be realized.

Advantages: low cost, safety and reliability, simple assembly and disassembly, can be used alone, and can also be freely spliced into various arrangements. Adding a universal wheel mechanism to the anchor can even realize the transshipment function.

Note: the upper and lower plates of the shelf are connected with the column with double angle codes and screws to make the shelf stable, and the middle layer

The board adopts 8-pin connection, which is convenient for installation and disassembly. Set the upper and lower adjustment layers of steel laminated plates with a spacing of 50 mm.

High, meet a variety of use requirements.

Angle steel shelf:

Specification: L 1500*W500*H 1500 three layers

L900*W400*H 1800？ four layers

L 1200*W600*H2000 five floors

Structure: It is composed of upright posts, laminated plates, angle codes, clamping pins, special bolts and plastic feet.

Column: 38*38* 1.8?

Bearing capacity: 50- 100 kg/layer

Laminated materials: steel plate, particleboard, density board, rich board, glass plate.

Surface treatment: plastic spraying and baking paint.

Advantages: beautiful appearance, arbitrary combination and wide use. The light steel keel shelf with general angle steel as the column is assembled by connecting and inserting, which is convenient to install and disassemble. The spacing of steel laminated plates can be adjusted at will, and the spacing between the upper and lower plates is 50mm, which can meet various use requirements. This is the most ideal upgrade product at present.

Medium-sized shelves (shelves):

Structure: It consists of columns, beams and laminated plates.

A. Column: The two columns are connected by nylon self-locking bolts, which can effectively prevent the shelf from being unstable after the bolts are loosened. There are double rows of oblique holes on the column, and the hole spacing is 50mm, so when the beam is hung on the column, the height of each layer can be adjusted up and down by 50 mm. The cross section of the column consists of seven faces. Due to the technology of "automatic punching first and then cold forming", the cracking and failure of the column caused by stress concentration of the column are completely avoided.

B beam: two column clamps are welded with the beam rod, and the beam rod adopts a special cold-rolled P-shaped closed beam. This structure has the characteristics of simplicity, reliability, light weight, strong bearing capacity and low cost. When the column clamp is connected with the column, it is equipped with a specially designed safety pin; Can ensure that the beam will not fall off after external impact;

C-laminate: the most popular strip laminate in the world is adopted, which has the characteristics of strong bearing capacity, wear resistance, simple replacement and low maintenance cost.

Scope of application: suitable for manual access to goods. Compared with the medium-sized I-shaped shelf, the shelf with the same length and width has a smaller span and a much higher bearing capacity because the laminates are laid along the width direction. Widely used in various industries, it has the characteristics of low cost, safety and reliability, simple disassembly and assembly, and can be used alone or freely spliced into various arrangements.

Type a shelf series:

Specification: L 1200*W600*H 1800? Three - story building

L 1500*W600*H2000？ four layers

L 1800*W800*H2000？ Five-layer

Structure: It consists of columns, beams, narrow hangers, wide hangers, laminated plates, safety pins, limit pins and plastic feet. ?

Column: 80 * 40 *1.2/1.5/2.0

Cross beam: 40 * 60 *1.2/1.5/2.0.

Bearing capacity: 200-300 kg/floor

Laminate: steel plate and wood plate can be selected.

Surface treatment: plastic spraying and baking paint.

Advantages: fully inserted combined structure, beautiful appearance, reasonable structure, no need for any bolt connection, convenient installation and disassembly, freely adjustable height direction, spacing of 50 mm

Type b shelf series:

Specification: L2000*W600*H2000? four layers

Structure: It consists of columns, beams, narrow hangers, wide hangers, laminated plates, safety pins, limit pins and plastic feet. ?

Column: 80 * 40 *1.5/1.8/2.0

Cross beam: 40 * 60 *1.5/1.8/2.0.

Bearing capacity: 300-500 kg/floor

Laminate: steel plate and wood plate can be selected.

Surface treatment: plastic spraying and baking paint.

Advantages: the butterfly hole structure is adopted for locking, and the locking depends on the self-weight of the goods, and the bearing capacity is greater than that of the medium-sized A-type shelf. It is convenient to disassemble and assemble, and the main and auxiliary frames can be connected infinitely, which increases the stability of the shelf and saves investment. The laminate can be adjusted up and down at will in units of 75mm.

Heavy shelves:

Structure: It adopts combined structure, which is connected with the column through beams and columns, and is equipped with safety pins, guardrails, baseboards and other accessories to ensure safety and reliability. ? It has the advantages of simple and beautiful overall, high safety factor, fast access speed, saving space and improving storage capacity. It is suitable for storing all kinds of goods, especially for forklift trucks and multiple stackers, and is widely used by many enterprises.

Basic elements of heavy shelf design;

1. Weight of goods (pallet or material box)

2. The size of the pallet and the size of the goods.

3. Height and endurance.

Surface treatment: spray paint.

Attic shelf:

Structure: It is usually composed of standard fittings such as columns, beams, laminated plates, floors, guardrails and stairs.

A. Column: The two columns are connected by nylon self-locking bolts, which can effectively prevent the shelf from being unstable after the bolts are loosened. There are double rows of oblique holes on the column, and the hole spacing is 50mm, so when the beam is hung on the column, the height of each layer can be adjusted up and down by 50 mm. The cross section of the column consists of seven faces. Due to the technology of "automatic punching first and then cold forming", the cracking and failure of the column caused by stress concentration of the column are completely avoided.

B beam: two column clamps are welded with the beam rod, and the beam rod adopts a special cold-rolled P-shaped closed beam. This structure has the characteristics of simplicity, reliability, light weight, strong bearing capacity and low cost. When the column clamp is connected with the column, it is equipped with a specially designed safety pin; Can ensure that the beam will not fall off after external impact;

C-laminate: the most popular strip laminate in the world is adopted, which has the characteristics of strong bearing capacity, wear resistance, simple replacement and low maintenance cost.

D. Floor slab: cold-rolled patterned steel plate or flat plate is used as the joint slab, which is directly fixed on the floor slab supporting beam by drilling tail nails, without welding seam, so as to avoid on-site welding construction; The surface can be galvanized or sprayed with plastic.

Note: Shelves are supported by floors and can be designed as multiple floors (generally 2-3 floors). Generally, the load-bearing capacity of medium-sized attic is 200-350Kg/M2, and that of heavy-duty attic is 400- 1200Kg/M2. Cargo lifting methods are usually divided into: manual, lifting platform, conveyor belt and forklift. Provide stairs, handrails and elevators. Suitable for high warehouse, small goods, manual access and large storage capacity. The floor support frame has complete varieties and specifications, and the attic floor has flat plate, diamond plate, steel chrome plate and wood plate.

Basic elements of attic shelf design;

1, size, weight and stacking method of goods

2, the floor and shelf bearing requirements

3. Building scale in the reservoir area

4, floor to ground height

5. Location and requirements of import and export ports of goods

Cross the shelf:

Scope of application: suitable for storing small varieties and large quantities of the same type of goods, with high space utilization rate. Goods can be accessed from the same side, or accessed from one side and taken out from the other side according to the principle of first-in first-out, which is especially suitable for the storage of standard goods units.

Structural features: It is mainly composed of columns, roofs, back beams, supports and shelves.

A. Column: The two columns are connected by nylon self-locking bolts, which can effectively prevent the shelf from being unstable after the bolts are loosened. There are double rows of drum-shaped holes on the column, and the hole spacing is 75mm, so when the beam is hung on the column, the height of each layer can be adjusted up and down by 75 mm. The column section is composed of 1 1~ 13, which has the advantages of large inertia distance, strong bearing capacity and strong impact resistance. Because of the technology of "automatic punching first, then cold bending forming", the possible cracking failure of the column due to stress concentration is completely avoided.

B. Top beam and back beam: welded by two column clamps and rectangular tubes. This structure has the characteristics of simplicity, reliability, light weight, large tension and pressure, and low cost. When the column clamp is connected with the column, it is equipped with a specially designed safety pin; Can ensure that the beam will not fall off after external impact;

C. Bracket: it is an integral stamping part, which avoids welding stress and has the characteristics of large inertia distance, strong bearing capacity and beautiful appearance. When connected with the upright post, it is equipped with a specially designed safety pin; Can ensure that the beam will not fall off after external impact;

D. Shelf: It is cold-rolled and can be made into any length as required. There is no joint, and the structure is beautiful and the force is uniform.

Basic elements of design that run through the continental shelf and reservoir area;

1. Weight of goods (including pallets)

2. Size and size of goods (width W* depth D* height h)

3. Lifting height of forklift and available clear height of warehouse.

4. Select the forklift model or parameters.

5. Store the building conditions of the reservoir area.

6, things in and out of the library direction and requirements

Storage cage:

Structure: Folding design, simple and safe operation, no space occupation, wide application range, long service life, firm spot welding of steel bars, easy storage, convenient inventory checking, layered unloading of stored materials in small batches, and avoiding the trouble of warehouse turnover. Four floors can be stacked by using carts and elevators. It can be folded when not in use, with only 20% of the original space.

Note: It is made of high-quality steel, welded after cold working and hardening, with high strength and large bearing capacity. Handling, turnover and storage are very convenient. Galvanized surface, beautiful, anti-oxidation, can be used for a long time. Adopting international standards, it can be used with containers. Can be piled up in a centralized way without a three-dimensional warehouse. Health immunization, turnover, storage and recycling do not pollute the environment. It is an updated product of wooden packaging box.

Supermarket shelves:

Specification: L900*W450*H 1600 single side

L900*W600*H 1600 double-sided

L 1200*W600*H2000？ single face

l 1200 * w 1 150 * h 2000？ Both sides

Overall types: 3 kinds

1. Backnet-type shelves, with one side and two sides.

2. Luxury backboard shelves are divided into single-sided and double-sided.

3. Backhole shelves are divided into single-sided and double-sided. This kind of shelf is mainly used in supermarkets.

Note: the height can be determined according to the goods. The display effect of the goods is excellent, the production technology is advanced, the quality management is strict, the high-quality cold-rolled stamping steel plate, the die stamping, phosphating and rust prevention, the surface plastic spraying and the structure are reasonable. The main and auxiliary frames are infinitely connected, which is convenient and safe, and you can choose a variety of hangers.

Cantilever shelf:

Structure: Cantilever frame is mainly composed of columns, cantilever beams and connectors.

A. column plate: composed of columns and base. The column is made of two cold-rolled C-shaped profiles welded face to face. According to the design theory of steel structure, this structure makes full use of the bearing capacity of materials and has the characteristics of light weight, strong bearing capacity and low cost. More economical and beautiful. It is a common structural form abroad. Double rows of holes were drilled on the column, and the hole spacing was 70/ 140.

B. Cantilever beam: The column clamp and the cantilever beam are welded together, and the beam rod adopts two special cold-rolled unequal-height C-shaped steel. This structure has the characteristics of light weight, strong bearing capacity and low cost. When the column clamp is connected with the column, it is equipped with a specially designed plate pin.

Scope of application: suitable for storing long bars and other materials that cannot be packed in pallets, and widely used in machining, wire and cable, building materials supermarkets and other industries; Suitable for storing long materials and irregular goods. Cantilever frame can be divided into light, medium and heavy series.

Roller frame (smooth frame):

Note: that is, put the goods on the drum, use one channel to stock and another channel to pick up the goods. The material rack inclines downward in the conveying direction, and the goods slide downward under the action of gravity. It can realize FIFO, replenish goods once and pick goods many times. Fluent frame adopts German EUROROLL fluent lath, which has stable operation, large load, low noise and freely adjustable flow channel size, and can work normally in the ultra-low temperature environment of -40℃. AN-33 roller is made of high-quality thermoplastic, with very small friction coefficient, excellent impact resistance, firmness and unbreakable. Chemically, it has good acid and alkali resistance and does not absorb moisture. The U-shaped groove of the smooth strip is made of bright galvanized steel with smooth edges, and the roller is made of stainless steel, bearing 6kg/ shaft.

Advantages: Smooth shelf has high storage efficiency and is suitable for short-term storage of a large number of goods. Suitable for the storage of goods with few varieties and large quantities. The goods are automatically transported from the incoming end to the outgoing end on the oblique wheel, which has the characteristics of fast access speed, high space utilization rate and first-in first-out

Scope of application: highly automated operations, publishing houses and factories are suitable for storing finished materials and small packages on production lines or assembly lines. The materials slide down along the rollers by gravity, first in first out; Used in logistics distribution centers, cargo operations, publishing houses and factories with high degree of automation.

Steel structure platform:

Structure: 1. Main beam, secondary beam, floor slab, stairs, guardrail.

The (1) H-shaped beam and C-shaped cold-formed beam of the special steel platform developed by Shengtong Company can be selected according to the load-bearing needs.

(2) The special C-shaped cold-formed steel plate or hollow slab for the floor adopts gusset structure and is rigidly fixed with the primary and secondary beams. The whole platform has strong structural integrity, and different floors can be selected according to the actual needs to meet the requirements of fire protection, dust prevention and falling prevention.

(3) The lighting system can also be arranged under the floor as required. Goods can be transported by hydraulic lifting platform, freight elevator or forklift.

2. Assembly without field welding. Usually the bearing capacity is 300KG ~ 1000KG/ m2.

3. A round tube with strong bearing capacity and less steel consumption;

Material: all made of high-quality carbon structural steel, fully automatic surface plastic spraying and anti-corrosion treatment, superior bearing performance, simple and elegant appearance. Widely used in various industries.

Push-back shelf:

Structure: It consists of columns, beams, tracks and trolleys.

The track is obliquely fixed on the cross beam of the shelf at a certain angle, and the carrying trolley runs along the track.

The whole structure adopts the principle of "magazine clip". Pallets are placed on the trolley and pushed into the shelves in turn, and the forklift does not need to enter the shelves. The operation mode is exactly the same as that of ordinary shelves.

Because it can be designed as multiple pallet positions in the depth direction of the shelf, the space utilization rate of the push-back shelf is higher than that of the ordinary shelf.

Advantages: the safety and working efficiency are much higher than that of the straight-through shelf.

Scope of application: widely used in cold storage, books, electronics and other industries.

A heavy shelf:

Structure: it is mainly composed of vertical column, cross beam, roller linear damping system and end part separation mechanism.

The roller line is obliquely fixed on the shelf beam at a certain angle, and the tray is put in from the high end and slides down along the roller line by its own gravity. In order to control the pallet to slide down at a stable speed and avoid collision, a set of damping system is set at regular intervals on the roller line. The faster the pallet slides down, the greater the resistance generated by the damping system.

The lower end is provided with an end separation mechanism to separate two adjacent trays at the lowest end, so that the tray at the lowest end can be taken out smoothly. Gravity shelves have higher requirements for pallets. At present, the use of wooden pallets is relatively mature, and pallets made of other materials need to provide actual pallets for damping experiments.

Advantages: The space utilization rate is higher than that of push-back shelves and straight-through shelves, and the principle of "first in first out" is truly realized. The safety and working efficiency are the same as those of shelves, and it is widely used in various industries.

Cargo hold:

Structure: It consists of columns, beams and standard fittings.

A. Column: The two columns are connected by nylon self-locking bolts, which can effectively prevent the shelf from being unstable after the bolts are loosened. There are double rows of drum-shaped holes on the column, and the hole spacing is 75mm, so when the beam is hung on the column, the height of each layer can be adjusted up and down by 75 mm. The column section is composed of 1 1- 13, which has the advantages of large inertia distance, strong bearing capacity and strong impact resistance. Because the technology of "automatic punching first and then cold bending forming" is adopted, the possibility of cracking and failure of the column due to stress concentration is completely avoided.

B beam: two column clamps are welded together with the beam rod, which is made of two specially-made "C" section steels, so that the thickness of the upper and lower surfaces of the beam is doubled. According to the design theory of steel structure, this structure makes full use of the bearing capacity of materials and has the characteristics of light weight, strong bearing capacity and low cost. When the beam is connected with the column, it is equipped with a specially designed safety pin with lifting lugs, which is not easy to pull out and can ensure that the beam will not fall off after being impacted by external force;

C. Standard parts of upright posts: nylon self-locking bolts provided by Taiwan Province Jinyi Company are adopted.

D. Gasket: It is made of card gasket, which is integrally stamped and formed without welding, and has the characteristics of good connection strength and beautiful appearance.

Plastic tray:

Note: Low-pressure high-density polyethylene plastic pallet is a new product in packaging industry and a good assistant for handling and storage. Compared with steel pallets and wooden pallets, it is light, flat and beautiful.

Scope of application: It can be used for forklift transportation and also as a pallet, which plays an important role in improving the efficiency of mechanized shipment and ensuring the storage quality of warehouses, especially the storage and transportation of flexible cartons. It is a warehousing and logistics product widely used in warehousing and transportation, also known as "padding" and "pallet". Storing the goods on the pallet is convenient for the forklift to transport the goods to other places, which is beneficial to the storage management. It is an important necessary equipment and tool for modern transportation and packaging warehouses and product export.

Advantages:

1. Durability: the service life of plastic pallets is about 8 times longer than that of wooden pallets.

2. Corrosion resistance, moisture resistance and moth resistance

3. The steel pallet has the most advantages in bearing capacity, while the plastic pallet has a steel-plastic integrated structure, which increases the bearing capacity of the plastic pallet and the price is much lower.

4. Environmental protection: Plastic trays can be recycled by manufacturers, which greatly reduces the cost of garbage and disposal.

5. Plastic trays can be made into various colors, which is convenient for 5S management.

6. Good integrity, no nails and thorns, tasteless and nontoxic, acid and alkali resistant, easy to clean and disinfect, no mildew, no combustion, no static electricity, no sparks, explosion-proof, anti-skid (with anti-skid pad), recyclable and other advantages;

7. The service life of plastic pallet is 5-7 times that of wooden pallet, and it is an important tool for modern transportation, packaging and storage. It is the internationally designated first choice product for food, aquatic products, medicines, chemicals and other packaging equipment.

Steel pallet:

Advantages: 1 Not afraid of insects, aging resistance, corrosion resistance, no moisture absorption and no deformation;

2. The materials can be reused and recycled, and the residual value is high;

3. It has the advantages of beautiful appearance, durability and maintenance-free;

4. The surface is galvanized or electrostatically sprayed, which is easy to clean and not easy to pollute;

Structure and manufacturing materials: the steel pallet is made of high-quality special profiles, consisting of panels and legs;

The reinforcing ribs of the panel and the lining are criss-crossed, so that the bearing capacity is more optimized, and the legs are strengthened and the load is evenly distributed;

Scope of application: it is suitable for all kinds of industries and occasions, with a wide scope of application.