What are the commonly used manual measurement methods for the dimensions of die surface parts?

Hand-held 3d scanner can be used to detect the dimensions of curved parts of dies. Its working principle is mainly to obtain the three-dimensional data of the surface of the part by laser measurement with the probe of the scanner, and compare the data with the original design data to evaluate the dimensional deviation and deformation of the part.

The hand-held 3d scanner of kassai Mzhongke Radio and TV Station has an accuracy of 0.0 1mm, which can realize non-contact measurement and has the advantages of high speed and high accuracy. It can quickly collect the three-dimensional characteristics of the mold, measure the size, shape and surface defects of the mold, and efficiently detect the shape and position errors of the mold, thus ensuring the quality of the mold.

The specific operation steps are as follows:

Scanning operation: operate CASAIM handheld 3d scanner to scan and measure the mold surface according to the set scanning parameters. During the scanning process, the position and angle of the scanner are constantly adjusted to ensure the accuracy and integrity of the scanned data.

Data processing: preprocess the scanned data, including data denoising, splicing and other operations. Through these operations, the scanned data can be transformed into a model that can be used for detection.

Size analysis: compare the detected model with the original design model, and analyze the size deviation and deformation of the mold. Some professional measurement software can be used for size analysis and evaluation.

Result output: collate and visualize the test results for subsequent analysis and use. The results can include various test reports, charts, etc. So that relevant personnel can quickly understand the quality of products.

By using CASAIM hand-held 3d scanner to measure the dimensions of die curved parts, efficient and accurate measurement of complex curved dies can be realized, which can help enterprises improve product quality and production efficiency. At the same time, this method can also provide strong data support for product improvement and optimization, and promote the technological progress and innovation of enterprises.

Zhongke Radio and Television, a subordinate department of China Academy of Sciences, headquartered in Guangzhou, is a comprehensive technical solution provider for 3D printing and 3D digitization in South China. CASAIM develops, produces and sells 3d printers, 3D scanning equipment and automated 3D detection systems related to intelligent manufacturing, and also provides corresponding technical services such as 3D scanning, 3D measurement, reverse modeling and 3D printing.

If you have any related business problems, please feel free to contact us in CASAIM official website to discuss with us!