How to change the water in the toilet?

Understand the reasons for changing water in the water tank.

The main reason for replacing toilet water is that long-term use will lead to the deterioration of water quality in the water tank and the possibility of water leakage. In addition, sometimes the rubber gasket in the water tank will age or be damaged and needs to be replaced. Therefore, before replacement, it is necessary to conduct a comprehensive inspection of the state of the water tank, determine the main problems and solve them in time.

Prepare the necessary tools and operate carefully.

The toilet needs the following tools to change water: wrench, screwdriver and tarpaulin. First, close the main valve and drain all the water in the water tank; Then, loosen the water inlet pipe with a wrench and remove the fastening screw at the bottom of the water tank with a screwdriver; Next, remove the old water tank water pipe and clean it; Finally, install a new water tank pipe and fix the screws in reverse order.

After replacement, it is necessary to open the main valve again to check whether the water tank operates normally. This step is to ensure that the newly installed water supply pipe does not leak and that the water quality and flow rate of the water tank are normal. If there is water leakage or abnormal situation, the corresponding parts should be adjusted or replaced in time. Finally, close the main valve again and observe carefully to ensure that there is no problem in the whole replacement process.