What are the precautions for drilling ceramic tile walls?

After we completely decorate our home, we need to hang something on the wall or decorate household appliances, so we have to make holes. However, tiles are mounted on the wall. If you punch holes, there must be many aspects to pay attention to. So today, I will answer two questions in detail: the small coup of ceramic drilling and the matters needing attention of ceramic tile wall drilling. After understanding, you can avoid the problem of holes in tiles and cracks in all tiles.

Small coup of ceramic stamping

Determine the drilling position: paste adhesive tape on the ceramic drilling position and draw a cross on it to determine. Choose a good drill: you can choose a glass drill or an all-ceramic drill. Electric hammer drilling: firstly, drill holes on the surface of ceramic tiles at a low speed with a speed regulating electric hammer, and then accelerate after entering to avoid ceramic fracture. Water spraying: continuous water spraying during drilling can avoid cracking of ceramic tiles caused by rising temperature.

What are the precautions for drilling ceramic tile walls?

1. When all tiles are drilled, water needs to be added while drilling, and water can only be added after the tiles are cooled. If the ceramic tile is seriously cracked, it can be repaired with toothpaste. Find toothpaste with the same color as the ceramic tile, squeeze out some, evenly spread it on the cracks, and then wipe off the excess toothpaste. When the toothpaste is dry, the cracks can be hidden.

2. When drilling expansion bolts for ceramic tiles, the drilling width should be selected according to the bolt size. When punching holes in tiles, dripping water at the same time can prevent tiles from cracking due to the heat generated by punching holes.

3. Cracking occurs when the ceramic tile is punched, which can be repaired according to the cracking phenomenon. If there are only some small cracks that do not affect the use, glass glue can be used to repair the cracks, which can avoid the cracks from turning black and making the tiles ugly.

4, when drilling, be sure to stick a layer of sealant on the surface of the ceramic tile, because this can prevent the porcelain glaze on the surface of the ceramic tile from slipping when drilling, causing the ceramic tile to break, and also prevent the drill from leaving the drilling position and scratching the surface of the ceramic tile.

As for the small coup of ceramic drilling, we must first determine the location of drilling, choose a good drill bit, drill with an electric hammer, and finally remember to spray water continuously when drilling. We introduced six aspects that should be paid attention to when drilling ceramic tile walls. The most important thing is to continuously spray water when drilling to avoid the problem of ceramic tile cracking caused by rising temperature during drilling.