The secret of technological process: make your tiles beautiful and durable!

Tile laying is an indispensable part of home improvement, which can not only beautify the space, but also improve the service life. This paper will reveal the technological process of ceramic tile laying for you, so that your laying project is both beautiful and durable.

♀? Basic treatment

First, we need to chisel out the protruding concrete from the wall and then clean it. If the surface is smooth, it needs to be shaved in advance. Hold your feet, hands and eyes at the same time, remove the residual mortar, pumice and dust on the substrate, and fully wet the substrate.

Find rules and plaster

Next, paste the ash cake and screed, and apply vertical screed with 1:3 cement mortar as the thickness basis of plastering. Plastering at the grass-roots level is generally 15mm thick, which is plastered twice, compacted with iron trowel each time, and paid attention to maintenance.

Brick lining elastic thread

Calculate the number of vertical and horizontal skins according to the pasting area, and determine the horizontal control line and vertical control line. Then pre-arranging, and adopting a linear arrangement method. Before pasting, soak the tiles in water for 2 hours until they don't bubble.

Paste tile

Paste mortar adopts 1: 1 cement mortar. Using the method of plastering, first put 3 ~ 4 mm thick mortar on the back of ceramic tile, and then paste it on the horizontal line. Pay attention to check the flatness and straightness at any time to ensure the paste is firm.

Wipe seam beautification

Finally, brush the joints with the same color cement slurry, and wipe the plain slurry at the joints with a cloth to ensure that the brick surface is clean and tidy.