Installation method of integrated ceiling Yuba Matters needing attention in installation of Yuba

I believe Yuba is no stranger to it. There are many kinds of Yuba on the market now, and the installation methods of different Yuba are different, so it is beneficial to know its methods before installation. So today, let's learn about the installation method of integrated ceiling Yuba and the matters needing attention when installing Yuba. I hope that Bian Xiao's method can help more owners understand the installation of Yuba.

1. Installation method of integrated ceiling Yuba

1, the first thing is to install the corner line. Ceiling must be installed after tiling and leveling, so that the matching corner line of integrated ceiling can be installed on it. The purpose of this is to make the installation effect without obvious gaps.

2, when choosing the derrick and frame light steel keel, the distance between the derrick and keel, the spacing must be consistent.

3. Top-level wiring. In this step, we must first determine where the owner wants to install lamps, and at the same time understand where the kitchen and bathroom appliances are installed, so as to arrange wiring.

4, gusset plate, relatively speaking, this installation link directly affects the overall installation effect, so be sure to remember to be flat and straight when installing.

5. Finally, consider installing (embedded) electrical appliances, and ensure that there is no gap between the panel and the electrical appliances.

Second, what should I pay attention to when installing Yuba?

1, the power wiring should be standardized, and the power of Yuba is relatively high, and the highest power can reach more than1100 W. Therefore, it is necessary to consider this when installing the power supply of Yuba, and the bathroom is a humid place, so you must choose waterproof wires. Bian Xiao had better choose a multi-core copper conductor not less than 1 mm, so it is safe to use, and its switch should also choose qualified products with waterproof ability above 10A to ensure its safety performance.

2. It should be installed in the center of the bathroom. Many families will consider installing the Yuba above the shower or bathtub. On the surface, there are many security risks in this installation method. You should know that this kind of electrical products are heated rapidly by infrared radiation lamps, and if they are installed too close, they will burn the skin. Therefore, the correct installation method is to install it in the center of the top of the bathroom or slightly near the bathtub, which is the most reasonable position.

The above contents were edited by Bian Xiao according to the installation method of integrated ceiling Yuba and the matters needing attention when installing Yuba. I hope that after reading this article, you can clearly know the installation method of Yuba.