Diagram of how to adjust the float.

What is the easiest way to float? Do you have a drift adjustment chart?

The following are pictures and videos of drift adjustment, which I hope will help you. Illustration of fishing drift adjustment: fish 960/ line-13690-1-simple drift adjustment method illustration: fish 960/ line-10703- 1 drift adjustment video encyclopedia: fish 96438. & gt

How to adjust the floating?

Use bait to adjust the drift, adjust four or five eyes and fish directly.

How to adjust floating fishing

First, double bait adjustment: this is the easiest to understand. Of course, before adjusting the bleaching, make sure that the bait balls you rub are basically the same, and then hang double bait and half water for debugging. When entering the water, the float will be affected by the weight of the bait. Slowly sinking,

Until the floating tail sinks completely, when debugging, just cut off the weight of the lead skin slowly until the floating tail shows the fisheye you want (one eye, two eyes or three eyes). If you adjust a few fishing eyes, the floating image at this time is the most sensitive, but we should pay attention to it.

Whether the baits are all the same size, and the baits will atomize some weight during launching, and the double baits will leave the ground after several adjustments. In order to avoid this problem, you can catch two eyes if you adjust one purpose with double bait. Three eyes, very

You can even catch five eyes and six eyes. As long as you like, you can catch lead directly where it falls and become a traditional fishing. As long as you have a wandering letter, it is no problem to speak out boldly. For fishermen, if they are not afraid of floating, they are afraid of floating.

Second, single hook adjustment: when debugging, only one empty hook is used, and it is adjusted several times. First, the weight of a hook is ignored, and then it is replaced by a hook group. When fishing, the floating tail is exposed out of the water to adjust the fisheye. At this time, the bottom hook must be undercover, and the hook just touches the ground. This adjustment method is simple and practical.

Third,

For single bait adjustment, first of all, the empty hook can't reach the bottom, {hanging a bait ball will slow down the atomization of the bait ball to be adjusted}. When launching, the float will slowly sink due to the weight of the bait ball. When debugging, just cut off the weight of lead skin slowly.

Until the floating tail shows the fishing eye you want (one eye, two eyes or three eyes), hang up the double bait after adjustment and throw it into the fishing area. The float will surely sink slowly with the weight of the double bait, and then move the float upward until the tail of the float is above the water.

For a fishing list with one eye, two eyes and three eyes, this drift adjustment method absolutely ensures that the lower bait ball is at the end and the upper bait ball is suspended, so that the weights of the two baits will not sink due to insufficient buoyancy of the floater, nor will they be blindly adjusted for several catches.

And the buoyancy of the float is too great. There is a phenomenon that the bait ball is not at the bottom and cannot be found. The purpose of this adjustment method is to make half the weight of the bait ball suspended by the buoyancy of the float and the other half supported by the bottom. There are many debugging methods for this method.

One of the most scientific bleaching methods.

How to float crucian carp

I don't know what fishing method you use. Generally speaking, it is nothing more than Taiwan fishing and traditional fishing!

Fishing in Taiwan Province:

1. Assemble the wire assembly and install the float and double hook. The float is about 30 cm away from the sub-line. Add lead (extra) to the lead base and pull the float into the water.

2. Adjust the distance between the float and the auxiliary line until the float is 1-2 mesh above the water surface (find the bottom).

3. Pull the float up 20 cm, and then the float will sink to the bottom again.

4. Cut off the lead skin gradually with scissors until the floating tail reveals the desired mesh (for example, 3 mesh or 4, 5, 6, 7 mesh). This mesh is the number that has been dialed several times. The specific mesh number should be comprehensively considered according to the performance of the float you use, the target fish, the season, the severity/fierceness of the fish mouth and many other factors. Remember to wrap the lead cover tightly on the lead cover seat after adjustment.

5. Double hook bait (feeding), note: keep the general size of each feeding. At this time, the float will sink into the water again under the gravity of the bait, and gradually adjust the float until the tail of the float comes out of the water to reach the number you want. This number is the number of "catches" that have been adjusted several times. For example, if you show your eyes, you will catch 1.

6. The above are the most basic bleaching methods, so you should learn so much first. The so-called "four fishing and two fishing" is a simple formula set by the earliest dharma drift, which is not suitable for the current fishing method. The specific adjustment of several catches needs specific analysis. This is a complicated theory. Take your time.

Suggestion:

1. Float is made of balsa wood or reed.

2. Floating-point numbers should be between 0 and 2 and should not exceed 2.

3. Start with rubbing bait, and don't practice pulling bait too early.

Traditional fishing methods:

1. Pull the float closer to the hook (it can be pulled to the bottom);

2. Throw the float into Hanoi and observe the state of the float;

3. If the fish floats into the water, it means that the lead skin is heavy, and vice versa;

4. Increase or decrease the lead skin with small scissors until the tip of the float floats up and down on the water surface; That is to say, at this time, the fish float is upright in the water, and the fish tip floats up and down in Shui Pi. Adjustment completed.

5. Pull up the float gradually until the tip of the float shows two eyes (where you want to fish) and find the bottom.

6. Take the bait and start fishing.

How to adjust the drift of hand-held floating fishing when fishing? How to catch a fish when it floats?

First, in the process of fishing, the adjustment of the drift of the hand pole is mainly based on bottom fishing, and the commonly used methods are four-eye and two-eye adjustment.

How to adjust four eyes to catch two eyes:

Adjust the float with an empty hook and a half water, adjust the weight of the lead weight to make the float surface for 4 meshes, and then hang the bait with a double hook to make the float sink into the water. At this time, adjust the position of the float upwards to make the bait surface for 2 meshes, and then fish.

Second, when fish float, they should readjust their floats:

The half hose bait adjusts the weight of the plumb sinker so that the floating objects can be fished out of the water for 4 eyes. When fishing, start fishing from 0.5 meters underwater, and adjust the position of the hook and bait to the depth of the fish layer according to the bait situation of the fish. When the bait signal is feeding, the float position should be adjusted downwards, and when the bait signal is black, the float position should be adjusted upwards.

How to adjust floating fishing when newcomers ask for advice?

You can cut off the hook at the bottom of fishing: after cutting off the hook, float in half water, adjust it to about five eyes, and hook for about four and a half eyes.

Fishing floats can be adjusted with bait, usually with bait and half water for four or five eyes. After adjustment, you can fish directly.

Adjustment skills of fish drift

The first fishing gear that comes into contact with is rod, line, drift and hook. At first, they turned a blind eye to everything. Some spend a lot of time and material resources, but they still go further and further. Some found a straight road through guidance and avoided many detours. Take the float as an example. Nowadays, many manufacturers produce a wide variety of floats, which makes people see things in a blur. I don't know which one to choose.

Floats can be roughly divided into five categories: soft carbon legs, hard tail floats, soft bamboo legs, hard tail floats, hard tail steel legs, and ultra-long floats. Their styles include long and short carbon legs, long and short carbon legs, (with broken tails), soft bamboo legs, and ultra-long steel legs. Wait a minute.

Different types of floats have different performances and different uses. For example, the selected floats are used for leisure fishing, and the pursuit of performance is not too high. It is enough to have floats that cadres can understand themselves. In the competition, there will be different environments and different fish conditions, and each drift type has its own different uses.

Carbon leg soft tail drift has good stability in water, strong wind resistance, relatively true drift letter and good next signal, and is usually used for fishing in competitive competitions.

Carbon leg hard tail drift, its performance is that it is a little slow to turn over in the water, but the next step is fast and the drift letter is obviously accurate. Used for rubbing bait and pulling bait for bottom fishing miscellaneous fish.

Bamboo legs are short, the tail is hard, the performance turns over quickly in water, and the drifting property is good. It is often used to fish in Shui Pi and catch fast fish in competitions.

Bamboo has long legs and hard tail, and its performance makes it turn over quickly in water. Their drifting ability is particularly strong, and they are often used for floating fishing in competitive competitions.

Steel leg hard tail drift is often used for bottom fishing for miscellaneous fish because of its fast turning over in water, strong stability, reliable drifting, good maneuverability and strong cutting power.

There is also an ultra-long carbon leg float with a long tail, mostly 40-65 cm in length. It has good performance, strong wind resistance, and can be as stable as Mount Tai in strong winds and waves. In the competition, because of its long float, the angle between the main line and the floating leg can be reduced in the water, which is much larger than other floats, and it is often used to catch miscellaneous fish at the bottom of the water. Submarine fishing.

After selecting the drift, you can catch the fish. If you want to catch a good fish, you must adjust the drift. First of all, you must abandon secular ideas. The traditional fishing method was gradually forgotten by competitors and replaced by Taiwan Province fishing, also known as hanging fishing.

No matter whether it is bait or empty hook, it should be debugged without the double hook touching the bottom. If the hook touches the bottom and the drift is inaccurate, novices should pay special attention to this, which is also a key step to break away from traditional fishing.

Double bait drift adjustment: this is the easiest to understand. Of course, before drifting, you must first make sure that the bait you rub is basically the same, and then hang the double bait and half water for debugging. When entering the water, the float will slowly sink under the weight of the bait until the tail sinks completely. When debugging, just cut off the weight of lead slowly until the fish eye (one eye, two eyes or three eyes) you want is exposed at the tail, such as adjustment. However, we should be concerned about whether the baits we rub are all the same size, and during the launch, the baits will atomize some weight, and the double baits will leave the ground after several adjustments. In order to avoid this problem, you can catch two eyes if you adjust a purpose with double bait. Three eyes, even five eyes and six eyes can be caught. As long as you like, you can catch lead directly and become a traditional fisherman. As long as you have a wandering letter, it is no problem to speak out boldly. For fishermen, if they are not afraid of floating, they are afraid of floating.

Single hook drift adjustment: only use an empty hook when debugging, adjust it several times, first ignore the weight of a hook, then put on the hook set after adjustment, so that the drift tail is exposed from the water to adjust the fish eye when fishing. At this time, the bottom hook must be undercover, and the hook just touches the ground. This adjustment method is simple and practical.

For single bait adjustment, first of all, the empty hook will not go to the bottom, {hanging a bait ball will slow down the atomization of the bait ball to be adjusted}. When launching, the float will slowly sink under the weight of the bait ball. When debugging, just cut off the weight of the lead skin slowly until the fish eye (one eye, two eyes or three eyes) you want is exposed at the tail of the float. After adjustment, hang a double bait and throw it into the fishing ground. The float will sink slowly with the weight of the double bait. Fishing with three eyes, this drift adjustment method absolutely ensures that the bait ball goes to the bottom and the upper bait ball is suspended, so that the weight of the two baits will not sink because of insufficient floating force, and the buoyancy of the float will not be too large because of blindly adjusting several catches. There is a phenomenon that the bait ball can't reach the bottom and can't find the bottom. The purpose of this adjustment method is to make half the weight of the bait ball suspend by the buoyancy of the float and multiply the other half by the bottom. ......

What should I use to float the fish? How to adjust the float and how to wire it.

Jujube core bleaching is the best choice for catching pelagic fish such as silver carp, bighead carp and grass carp, because it turns over quickly, specializes in fishing classification, and is slow after turning over twice, which is beneficial for fish to catch effective signals of acceleration, topping and pause.

If the drift is adjusted, it is suggested that the double hook bait should be adjusted to 1 mesh, and the fishing should be adjusted to 1 mesh, so as to slow down the second drift, imitate the natural falling of food in natural waters, and cooperate with the long line to attract fish.

If the line group is used to catch a big fish of more than 5 kg, the No.3 main line and No.2 auxiliary line can be equipped with ropes, and the No.2 main line and No.2 auxiliary line within 5 kg can be equipped with ropes.