Can you connect the two inlet hoses of the hot and cold faucet with the faucet by hand? Tools can't get into the faucet.

You can't screw the hose by hand, you need a wrench. The tool really can't get into the faucet, but the installation sequence is to remove the faucet from the sink first, then tighten the water inlet hose on the faucet inlet hole with a wrench, and then install the faucet on the faucet hole of the sink. The specific methods and steps are as follows:

1. Prepare two wrenches, a small bayonet wrench and a adjustable wrench. Adjustable wrench is used to screw the nut on one end of the hose, and the small bayonet wrench is used to screw the other end of the hose into the faucet.

2. At this time, remove the mixing faucet from the sink, align one end of the external thread of the hose with the water inlet hole of the faucet and screw it on.

3. Then pass the threaded copper pipe that just fixed the faucet through the hose.

4. Then pass the second hose through the threaded copper tube, align one end of the external thread of the hose with another water inlet hole of the faucet, and then tighten the two hoses with a small bayonet wrench.

5. Screw the copper pipe fixing the faucet onto the faucet and install the rubber pad.

6. Pass two hoses through the faucet fixing hole of the sink, and insert the fixed copper tube into the hole.

7. Pass the fixing nut of the faucet fixing copper tube through the two hoses below.

8. Tighten the nut and copper tube to complete the task of installing the hose.