How to remove the watch strap?

Push down the spring watch shaft at the buckle with a toothpick. After removing the watch shaft at the clasp, insert a small screwdriver into the small hole in the direction of the arrow, and push it up hard to pop up the F-pin used for strap connection. After the pin is removed, the belt becomes loose and the next part is removed. This completes the disassembly of the watch chain. Remove the mechanical watch strap as follows:

Operating tools: toothpick, small screwdriver, small hammer, mechanical watch.

1. First, push the spring watch shaft down at the belt buckle with a toothpick. Pay attention to the end of the strap, not the folded buckle side.

2. After the watch shaft at the watch buckle is removed, one side of the watch has five detachable sections, and the other side has four detachable sections, and the one of the five sections is removed.

3. Insert a small screwdriver into the hole in the direction of arrow and push it up. If you plan to remove a buckle, remove two connected parts.

4. Eject the F pin for belt connection.

5. After the pin was removed, the belt became loose. Go to the next paragraph. This completes the disassembly of the watch chain.

6. After reading how to remove the bracelet, let's see how to install it. After disassembly, reconnect. Insert the latch, paying attention to the front and back. You can refer to the disassembled watch.

7. Gently tap the pin into the belt with a small hammer.