Homemade TV Antenna Detailed Tutorial Video

Method 1:

Material: an aluminum strip or tube, several meters long feeder, fine copper wire, pliers, box ruler.

1. When making TV outdoor antenna, you need to use a box ruler with a certain size of aluminum tube. At the same time, both ends of the aluminum tube are bent inward with pliers, and the length is kept the same when bending;

2. Then peel off a section of TV feeder to expose the copper wire and screen inside, take out two sections of copper wire and connect them to the central copper wire and screen wire respectively, and then connect both ends of the copper tube with thin copper wire at the same time, but the two copper wires cannot touch each other.

3. After completing the above steps, you need to find the connector to connect the TV, then connect the other end of the feeder with two wires, and then connect it to the TV. Finally, raise the shelf used by the antenna and let it automatically search for channels. At this time, local TV stations will basically appear, and then just adjust the orientation of the antenna.

Method 2:

1. To make TV outdoor antenna with cans, first you need to set an empty space outside the opening of cans, then pass a screw, and then fix two cans on an insulating strip.

2, fixed, and then take out a 300ω.

The feeder is fixed on two screws of the insulating strip respectively, and the other end is connected with the matching device.

3. Keep the distance between the two cans at 60 to 80 mm Finally, find a beautiful wine bottle as the base, punch a small hole in the lid of the wine bottle, and fix the antenna and the insulating strip together.