Manufacturing method of hooking device

The manufacture method of that hooking device is as follow:

1. Cut rubber leather, with the length and width of 1cm respectively.

2. Cut the pin with pliers and make it into a shape with a width of 1 cm.

3. Assemble the finished pin and rubber skin together.

4. Use a blade to cut a gap along the left side of the pin, next to the pin, and the gap should not be too long. Open the notch, and the hooking device is completed.

The use method of the hook device is as follows:

1. First, put one end of the fishing line in the gap of the coupler, just exposing1-2cm outside, not too long.

2. Put the hook and hook handle outward.

3. Pass another wire around the pin.

4. After bypassing the pin, circle from the inside out for 7-8 times. According to your own habits, it is also possible to wind from the outside to the inside. The hooks are the same, they are all wrapped inside.

5, yearning to tighten the line, remove the hook device, tighten the finishing, and cut off the excess line at the bottom of the hook, so that a fish hook is fastened.

Note: when sorting the sub-line, make it near the ditch door, that is, inward, which is more difficult to run fish elsewhere than the sub-line.

1. Hook tying device is a tool for tying fish hooks, which is characterized by smaller hooks and thinner fishing lines. Hook tying device is a tool for tying fish hooks. The English name is Hook Tier. Because the hook is small and the fishing line is thin, it is inconvenient to tie the knot by hand. The appearance of hook tying device replaces manual hook tying, which provides great convenience for fishing enthusiasts.

2. Fish hooks are generally tied to both sides of the dividing line with double hooks. You can also use a single hook and tie it at one end. You can also use more than 2 hooks, such as string hooks, and you must connect 3 to 5 hooks first. Different hook types are used to catch different fish, such as sleeve hook and drift hook for small fish, sleeve hook for black pit fishing and table fishing, and drift hook for wild fishing.

3. Use Yi Shi Ni hook, Izu hook and New Kanto hook when fishing big fish. The material of the fishing line is also determined according to the size of the fish. Small fish use nylon thread, big fish use strong horse thread. Then choose the appropriate model according to the specific weight and strength of the fish.