The reason why the traditional old washing machine doesn't turn

Washing machine is an indispensable electrical appliance in modern family life, and its existence makes us more convenient and comfortable in the fast-paced life. However, sometimes when we use the traditional old washing machine, we will find that it doesn't work. So, what are the reasons for the washing machine not turning?

1. power supply problem: first of all, we need to check whether the electrical socket and plug are normal, because sometimes the washing machine can't work just because the circuit is faulty or the plug is not firmly inserted.

2. The water inlet pipe or drain pipe of the washing machine is blocked: If the water inlet pipe or drain pipe of the washing machine is blocked, the washing machine will not operate normally. Please check whether the pipeline is clean and unobstructed.

3. Motor damage: If the motor of the washing machine is damaged or the circuit board fails, it will not work and needs to be repaired or replaced.

4. Loose or worn belt: The belt of the washing machine is the element that drives the rotating machine. If the belt is slack or worn, the machine will not work properly.

5. Excessive load on the rotor bracket or rotating shaft: When the washing machine is in an unstable state, there may be problems with the rotor bracket or rotating shaft, resulting in the machine not turning.

6. Pulley or bearing damage: Pulley or bearing is another important part of washing machine. If they are damaged, the machine will not work properly.

7. Transmission shaft or gear failure: Transmission shaft or gear is a rotating part in the washing machine. If they fail, the machine won't turn.

In short, the above seven situations may cause the traditional old washing machine not to turn. If this happens, it is suggested to eliminate the fault in time and maintain the washing machine regularly, so as to better extend the service life of the washing machine.