How to tell what kind of wood is used to make the ancient chair

Solid wood : Its material is mainly divided into hardwood and softwood. The hardwood material is more suitable for translucent carving process, while the furniture made of softwood is affordable. One . Hardwood

Because of the stability of the wood, made of furniture has been handed down for a long time. Common hardwoods are rosewood, yellow rosewood, chicken wing wood and sour branch . Rosewood:

The most valuable wood, solid but slow-growing, so most of the furniture is a few pieces of mortise and tenon, such as the appearance of the whole panel is quite rare and precious. Its color is mostly purple-black, exuding a quiet and noble temperament.

Rosewood:

Rosewood, legume pterocarpus subfamily rosewood genus with high-quality dark-colored heartwood of precious species. Rosewood heartwood sapwood distinction is obvious, sapwood yellow-white to gray-brown; heartwood reddish brown, purplish red to purple-brown; material color is more uniform, can be seen dark stripes, growth wheel is not obvious or slightly obvious. Scattered porous material or semi-annular porous material, single-tubular holes, a few radial rows of complex tubular holes, containing dark-colored gum, sediment or infill. Axial thin-walled tissue winged, polywinged, banded, ring tube bundle and whorl boundary. Wood rays are fine to very fine, predominantly uniseriate, with inconspicuous or slightly conspicuous mottling on the radial surface, and corrugations on the chords. Wood is glossy, with a slight or significant aroma, interlacing grain, fine and uniform structure, part of South America, Africa, slightly coarse, corrosion resistance, durability. The material is hard and heavy, part of the medium, high strength, part of the medium, usually floating in the water, wood powder or wood chips water immersion liquid fluorescence phenomenon.

Mostly found in Ming furniture, dense wood, color from light yellow to dark brown. General Huanghuali furniture the longer it is used, the color instead of the more bright, more suitable for modern space. Chicken Wing Wood:

Solid texture, grain purple-brown shades. Modern in use, making its lines more fluent, in the traditional injection of new ideas . Sour branch

: good sour branch wood similar to rosewood, but the luster and color is slightly lighter, warm color, more production. II. Softwood

There are many types, made of furniture, the price can be accepted by most people. Many softwoods are also used with hardwoods. Such as beech, nanmu, camphor, pine and cedar are common softwood materials. 1

, black walnut, walnut is one of the highest quality wood, mainly from North America and Europe. Domestic walnut, lighter in color. Black walnut is light black brown with purple, string section for the beautiful parabolic pattern ( large mountain pattern

). Black walnut is very expensive, and furniture is usually made from veneer, rarely from solid wood. 2

, cherry, imported cherry wood mainly from Europe and North America, light yellow-brown wood, elegant grain, string cut surface for the medium parabolic pattern, between small circles. Cherry wood is also high-grade wood, do furniture is also usually veneer, rarely with solid wood.

3, beech, beech here refers to beech, and traditional Chinese furniture in the " South Beech North Elm " of beech is two different things. Beech wood color bright light yellow, with dense " needle " ( wood rays )

, rotary cut with mountain grain. Imported beech in Europe has fewer defects, much better than domestic. Imported beech wood in the country belongs to the middle and high grade wood, commonly used veneer, solid wood is also used as dining chairs and small square bars, etc.. 4

, maple, maple light yellow color, there are small mountain grain, the biggest feature is a " shadow " ( local gloss is obvious ). Maple is a mid-range wood, veneer and solid wood are common. 5

, birch, birch light yellow color, easy to distinguish the characteristics of more "waterline" (black line). Birch is also a mid-range wood, solid wood and veneer are common.

6, rubber wood, native to Brazil, Malaysia, Thailand and so on. Domestic production in Yunnan, Hainan and coastal areas, is the raw material for latex. Rubber wood color is light yellow-brown, with small stray rays, the annual rings are obvious, the wheel boundaries for the dark band, the tube hole is very little. Wood structure coarse and uniform. The grain is oblique, and the wood is hard.

Advantages: smooth cut, easy to glue, good paint application.

Disadvantages: rubber wood has an odor, because of the sugar content, easy to discoloration, decay and insect moths. Not easy to dry, not wear-resistant, easy to crack, easy to bend and deform, wood processing is easy, while the sheet processing is easy to deform. 7

, Quercus serrata: heavy and hard material, coarse structure, wood rays are very obvious, high mechanical strength, the wood is not easy to dry, processing difficulties, damage resistance, cementation is not easy, but coloring performance is good, bending performance is very good, commonly used as furniture surface material and do thin wood veneer.

8, pine: no carving, clear texture, fine lines. With pine flavor, there are beautiful scars. The production process is demanding, need to dry degreasing. 9, rowan wood:

The wood has a glossy, slightly coarse structure, slow drying, not easy to warp, easy to process, strong nail force. 10, elm:

Tough wood, grain through clear, moderate hardness and strength, general carving relief can adapt to, smooth planing surface hope you can help, the above information from the network, please refer to the in-kind prevail