The difference between the front and back of a carpenter's axe

There are roughly two aspects in carpentry's axe decoration skills: first, cutting with an axe should not harm people's health and protect people's safety; Second, chop wood with an axe. Don't cut ink lines to destroy wood, which will not only waste working hours, but also damage wood.

The skills of chopping with an axe without hurting people mainly lie in correct posture, accurate grasp of force, accurate eyes when chopping wood, correct hands, good use of wrist strength and proper command of ideas. Axes for decoration and carpentry can be cut with one hand and two hands. The posture of one-handed axe is that one foot bows in front and one foot squats in the back half, and the distance between the two feet is a little wider than the shoulder. When chopping, put the wood right in front, hold the wood with one hand, and hold the front of the axe handle with the other hand. The rear end of the axe handle should be slightly next to the outer edge of the hind foot. Whenever the axe cuts, the end of the wooden handle must rub against the hind leg pants to prevent people from cutting too hard or being injured by the back edge of the axe after cutting the neutral position.

In addition, because the axe rubs the rear end of trousers up and down, it can better grasp the cutting penetration, and at the same time, it can control the wrist force of a good hand to ensure that the strength is not excessive, so as not to hurt people, or because the distance outside the hind foot is too wide, it will take too much effort to use the axe with one hand, and it will not last too long, which will affect the cutting speed.