How to change the watch strap?

When changing the strap, you need to spread the strap on the table. Use a pointed tool to find the position of the bolt along the arrow on the back of the strap, push the bolt out and remove the strap. Then put one end of the new strap rod into the shallow groove of the watch and poke it into the strap. The head of the thin stick will automatically spring into the deep groove, so that the belt that has been installed once can be reinstalled on the other side. There are many kinds of watchbands now, the most common ones are stainless steel and leather. Leather or plastic watchbands have a service life. When replacing them, it should be noted that the width of the strap should be suitable for the width of the case opening, not too narrow. If the strap is narrow, it will move left and right, which will easily compress the spring of the strap bolt and make it fall off, resulting in the loss of the watch and unsightly appearance. Removing the belt is directional. Generally, there is an arrow on the strap, indicating the direction in which the earrings between the strap sections rush out. This is irreversible. The installation direction is opposite to the removal direction. Generally, the strap is removed before cleaning, which is not only simple to operate, but more importantly, it can prevent water from entering the watch during cleaning. After the strap is taken off, wipe it with a soft cloth in a large area, that is, first wipe off some dust obviously attached to the strap and dirt on the connection part.