How to install superconducting gasification heating furnace

1, ash drawer: store the ash falling from the grate.

2, wind dispenser (I) type: through the adjustment of the wind dispenser, to ensure and control the amount of air extracted from the furnace, and make the furnace to achieve the best effect of heating

. 3, wind dispenser (II): through the adjustment of the wind dispenser, control the amount of air extraction of the tornado ring, and make the cooking to achieve the best results. 4、 Furnace cover and rim: remove the cover and rim when adding coal for cooking, and cover the rim and rim when warming and sealing the fire.

5, temperature, pressure display table: by observing the temperature and pressure to determine whether the internal temperature and pressure of the stove over the allowable limit. 6、 Chimney connector: used to connect the chimney.

7, water outlet: connected with the main water riser and radiator. 8, heat exchanger hot water outlet: connected to the general hot water.

9, heat exchanger cold water inlet: connected to the water pipe or cold water tank. 10, labeling: labeling furnace data. 11, dust door: used to open and remove the dust on top of the heated pipe, dust removal twice a day. 12,

Explosion-proof valve: installed in the back of the furnace when the furnace due to installation errors or due to freezing of the system piping to the furnace with

pressure, explosion-proof piece will rupture, pressure relief, thus protecting the safety of the heating system.

13, switching lever: used to change the oxidizing furnace cooking, heating state of use (push back heating, pull forward cooking). 14, grate handle: by shaking the grate to rotate, realize the ash. 15, back to the water outlet: the return pipe, in the furnace body under the rear side.

Heating furnace, also known as heating furnace, is short for heating boiler, belonging to the civil life of a boiler, mainly refers to a normal pressure boiler that can meet the heating needs of people gas heating furnace, belonging to the category of civil hot water boiler. The earliest heating furnace is not a boiler, but a coal-fired wood-burning direct heating a prototype stove, with the rapid development of society, the heating furnace innovation, improvement is also changing day by day, heating furnace is not what it used to be, the appearance of a beautiful, advanced features have become the main features of the heating furnace.