Binding method of fishhook and main line

1, main line:

First, the main line passes through one end of the figure-eight ring, then the short end is wound around another fishing line for at least 4 times, then a shorter line passes through the folded part of the figure-eight ring, and finally the fishing line is tightened.

2. Sub-bank:

First, thread the sub-wire through the figure-eight ring, then wrap the knotted end around the upper edge of the double-slot sub-wire several times, and then thread one end through the ring closest to the figure-eight ring. Pay attention to the position of the knot beyond the position of the ring.

There are three kinds of hooks: single hook binding, double groove binding and eight-character ring binding on the main line. The single hook binding method is similar to the eight-character ring binding method, that is, the fishing line is folded in half by one third, then the folded part passes through the loop, the separated thread ends are tightened after several turns, and finally the redundant thread ends are cut off. Generally, when there are many obstacles around the fishing point, fishing with a single hook is used.

In fact, the double-ditch tying method is also a kind of tying method of the sub-wire, without knotting, but it will take a long time to replace the sub-wire. The principle is to fold the secondary line in half, pass the hook-free end through the ring and finally through the buckle.

Tie the figure-eight ring to the main line, and thread the end of the main line and the lead base into a place of the figure-eight ring. After passing through, wrap the passed end around the unexposed end several times, pass the short end through the part folded with the splayed ring, and then tighten the main line.