How to replace the sponge mop head, sponge mop how to change the mop head

1. The first first remove the screw on the rubber sponge mop lever, that is, the screw in the center position on the mop lever.

2. After removing the screws, the mop head with the iron piece is taken down as a whole.

3. Remove the screws on the mop head and iron piece, causing the separation of the mop head and iron piece.

4. Screw the new mop head to the patch, then put the iron piece with the mop head through the two holes on the top of the roller, and thirdly screw the other end of the iron piece and the joystick tightly, the assembly is completed.

5. Mop: Mop, also known as dun floor rags, refers to scrubbing the floor of the long-handled cleaning tools, but also refers to the long-handled cleaning tools.

6. Mops should be derived from rags.

7. The most traditional mop, a bundle of cloth tied to the end of a long wooden pole into.

8. Simple and inexpensive.

9. The working head is transformed from a rag block to a bundle of cloth strips with strong stain removal ability.

10. The mop is one of the appliances in which dirt resides the most, and if you don't pay attention to cleaning, it becomes a breeding ground for some microorganisms and disease-causing bacteria.

11. Mops in use, the most likely to come into contact with the organic components of the ground, these components will be used by fungi and bacteria, when they are in a long-term wet environment, mold, fungi, candida and dust mites and other microorganisms and bacteria will grow rapidly.

12. When you use it again afterward, not only can you not clean the ground, but it is more likely to cause bacteria to spread and cause diseases such as respiratory, intestinal and allergic dermatitis.