Hand-throwing net weaving method for fishing net

The weaving method of fishing net hand-throwing net is as follows:

Knot method: it is a traditional method to make fishing nets. Fishing nets are made of warp and weft in shuttles. Nodules are four times the diameter of the net rope, and they protrude from the plane of the net. This kind of net is called netting. Tuberculosis collides with the fish and the ship's rail when pulling the net, which not only hurts the fish but also wears the net.

Twisting method: two groups of yarns are twisted by the machine at the same time, and they cross each other at the joint to form a net, which is called untwisted netless. Because the yarn at the mesh node is not bent, the mesh is flat and the friction is reduced, but the twisting machine is inefficient and the preparation process is low. The main raw materials for weaving fishing nets are 15 to 36 strands, 2 10 denier nylon, polyester multifilaments and ethylene monofilaments with diameters of 0.8 to 1 and 2mm.

Pulling a net is a big net. The mesh is about tens or hundreds of feet long, with a pendant and a float. Ministers at both ends. When fishing, one end of the rope is tied to the shore, then the net is loaded with a sampan, and the other end of the rope is cast on the sea surface, and then the rope is pulled ashore. When pulling the net, people stand in two rows, singing songs, and quickly close the net, which is also called "seeing the net", which best embodies the spirit of fishermen Qi Xin's cooperation. Pulling nets is suitable for places with flat seabed and many beaches.

When fishermen go out to sea, they usually use a single-covered "foot" boat with a lot of nets and awns. When fishing, they have to lay a awn, and then lay one or more nets to connect each awn with the net. This kind of net has ups and downs. Tie the net to the boat after casting it. Mesh and awn form a net wall in the sea. When fish swim here, they are often caught in the net and can't advance or retreat.