What are the charging steps of electric vehicle charging pile

Power gear off.1. Unlock the whole vehicle and open the hatch and protective cover of the AC charging socket.2. Connect the vehicle plug of the charging pile with the vehicle socket.3. Start charging according to the instruction of the charging equipment.4. Combination meter lights up the charging connection indicator and displays the charging screen at the same time.5. End charging by unlocking the whole vehicle, setting up the charging equipment, or charging the vehicle with full charge.

The charging performance of the charging pile, as the energy supply device of the electric vehicle, is related to the service life and charging time of the battery pack. This is one of the aspects consumers are most concerned about before purchasing an EV. Realizing fast, efficient, safe and reasonable power supply to the power battery is the basic principle of EV charger design. In addition, the applicability of the charger to various power batteries should also be considered. The rapid charger control system adopts intelligent variable pulse charging, i.e., charging current pulses, including charging pulse T1, intermittent pulse T2, and discharging pulse T3.The scheme of the ground charging station charger consists of a rectifier that can convert the input AC power supply to DC power supply, and a power converter for the scheme that can adjust the DC power supply of the ground charging station charger. The DC power can be fed into the battery to charge it by inserting a plug with a cord into a matching socket on the electric vehicle. The charger is equipped with a locking lever for easy insertion and removal of the plug, while the locking lever provides a signal to confirm that it is locked for safety.