What are the methods of making exquisite bookmarks

Bookmark is a small thing that many friends who love to read will use. Here I introduce you to the production method of exquisite bookmarks, welcome to read.

Exquisite bookmark production method a

1 take a white cardboard

2 the cardboard cut two bookmark-sized pieces of paper

3 one of the pieces of the painting on the inner frame

4 will be cut out of the inner frame

5 organize embossed material (will not do it can be seen in my previous embossing experience)

6 Apply solid adhesive on the `cardboard without inner frame, and glue the embossing material on the cardboard

7 Apply solid adhesive on the cardboard with inner frame, and glue it on the backing

8 Apply the lamination on it to seal the whole bookmark. (I do not have a film, but you should have seen the cell phone film, the same)

exquisite bookmark production method two

1. Preparation

The preparation of materials is still relatively simple, about more than 20 grams of sodium hydroxide, as well as your favorite leaves, plus not be corroded by the small jar, a small brush, your favorite paint. Can be fresh, can be already withered, as long as you like can be, the only thing to pay attention to is to find the kind of leaf veins thicker, or not to time is not good color.

2. Begin to make the water to go to the leaf meat

Sodium hydroxide has a strong corrosive, so look for the jar can not be made of aluminum, so it will be and sodium hydroxide reaction. Because sodium hydroxide is supposed to be an exothermic reaction, it's important to be safe. First to the jar filled with 3/4 of the water, and then put about 10 to 15 grams of sodium hydroxide, you can according to the amount of water to increase the sodium hydroxide properly....

3. To the work of the beginning of the flesh

Put sodium hydroxide into the water after the leaves you like to quickly put in, after a period of time to pick up to see if the flesh of the leaf is removed almost, if it is not yet possible to add a little bit of sodium hydroxide, pay attention to the immersion time should not be too long, or not even the veins of the leaf also corroded.

4. Remove excess leaf flesh

After the leaves from the sodium hydroxide solution, there must be a lot of leaf veins remain on the leaves, then we have to put the leaves flat on a board, and then use a brush to brush off the excess veins, pay attention to a little bit lighter, the leaf veins are very fragile, if it breaks, it's not good.

5. With your favorite color

After removing the leaf flesh, you can use the row of pens to give your bookmarks on the color, to color evenly, gently brush, to avoid the veins of the leaf brush broken.

6. drying can be used

When your bookmarks have been completed, but also relatively wet, this time is not suitable for immediate use, to wait for it to the sun, and then wait for it to dry, a piece of beautiful leaf veins bookmarks are made, preservation of a longer period of time.