Handmade Plate Button Tutorial

Handmade Plate Button Tutorial as follows:

1, lining hand sewing method

Take 2cm wide diagonal silk (45 degrees) 30 to 50cm, thin material should be lined with a few cotton yarn in the middle of the diagonal strip of cloth, so that it is hard and durable, and thick material can be lined with no cotton yarn. The way to do it is to pin it first and then pay it down firmly with a right-hand sewing needle. It can be used to make straight buttons, pipa buttons and solid core flower buttons.

2, machine sewing dark line method

In order to make the buckle disk system without the trace, beautiful shape, can be folded diagonal cloth, sewing machine burlap sewing one, and then use a long needle to turn into a buckle strip. It can be used to make all kinds of disk buckle.

3, machine sewing line method

With 2cm wide diagonal cloth strip, fold both sides of the burr into 4 layers, and then use the sewing machine edge sewing line a. It can be used to do all kinds of disk buckle. It can be used to make all kinds of disk buttons.

4, wrapped in fine copper wire method

First, the reverse side of the fabric scraped on a thin layer of paste to dry, according to the 2cm width of the drawing with the scratching powder and cut out the diagonal strip of cloth, will be both sides of the strip of cloth folded inward into the hair into the 4 layers, and a copper wire clamped in the middle of the 4 layers of the folded line inside, and then scrape the paste sticking to the iron, the width of the band should not be more than 0.5cm. it can be used to do the empty core flower and embedded core flower buckle.

5, buckle pile knotting method

Will have made a good buckle terrier strip, according to the method in Figure 5 in accordance with the order of the gradual knitting. After knitting, it should be pulled evenly and tightly, and become a strong and hard bead.

6, straight buckle disk method

Straight buckle is the most common disk buckle, buckle belt and buckle pile made, should leave the buckle foot length of about 5cm, buckle pile and buckle tabs of the same length of the foot.