Wiring of stair lighting switch

The wiring diagram of stair lighting switch refers to the wiring diagram between switch and lamp in stair lighting system. This drawing can help electricians or decorators correctly install and connect the stair lighting switch.

Prepare materials and tools

First of all, you need to prepare the following materials and tools: stair lighting, switches, wires, electrical tape, electric scissors, flat screwdriver, pliers and so on.

Determine the number of switches

Next, determine the number of switches according to the number of stair lighting lamps. At the position of the switch, the entrance and exit of the wire are reserved first, and then the terminals of the switch are connected to the wire according to the model of the switch.

Connecting lamp wire

Then, lead the wire out of the switch position and walk along the wall or ground of the stairs to the light position. At the position of the lamp, connect the wire to the terminal of the lamp and tighten it with pliers to ensure good contact.

Fixed connection point

Finally, use electrical tape to fix the connection points of stair lighting, switches and wires, and use flat screwdriver to install the switch and panel of the lamp.

Matters needing attention

It should be noted that when connecting wires, they should be correctly connected to the corresponding terminals of switches and lamps according to the color of the wires. Generally speaking, the blue wire is connected to the neutral end, and the brown wire or black wire is connected to the live end. In a word, the wiring diagram of stair lighting switch is very important for the correct installation and connection of stair lighting system. When connecting, you must pay attention to safety to ensure the stability and reliability of the connection.