Wall solid use method and precautions

Wall solid is a wall curing adhesive, is a substitute for 108 adhesive, interface agent, is a kind of green environmental protection, high-performance interface treatment materials. This product has excellent permeability, can fully infiltrate the surface of the wall base material, through the adhesive linkage to make the grass-roots level dense, improve the interface adhesion, improve the adhesive strength of the mortar or putty and the wall surface, to prevent the hollow drum. It is suitable for the compact treatment of the grass-roots level before applying plaster and scraping putty on the brick wall surface. Wall solid can improve the adhesion of smooth grass-roots level, is the traditional building interface agent of the new generation of products.

Construction requirements and precautionsThe surface of the grass-roots level should be solid and free of floating ash and grease. Dilute the wall solid into 20%-30% water, apply it to the wall surface with roller brush and apply it 1-2 times. Hair-making: Mix cement and wall solidifier into a paste and apply it on the base with tools. Construction temperature above 5℃, unused glue pay attention to sealing. Wall solid is strictly prohibited and other brands of adhesive mixing. Construction temperature construction environment temperature above 5℃. ConsumptionTheoretically, 1kg wall solid can be coated 10 square meters (once).

The actual dosage varies according to the influence of various factors in the construction. Usage and dosage to be wall solid coating dry or "hair" maintenance dry can start plastering or scraping putty, with 1:1 cement mortar to join the cement mortar, it will be wiped on the back of the tile leveling compaction, mortar from top to bottom, and always check the flatness with a ruler. Bonding wallpaper and wallpaper, such as high viscosity can be diluted with a small amount of water, with wall solid "hair" shall not be added to the use of water.