Gas boiler energy-saving renovation can bring what is substantial energy-saving effect

Gas boiler energy-saving renovation implementation mainly from the following aspects: a. Due to the boiler circulating water heating flow is too large, resulting in a large fire burning, increasing the gas consumption, reducing the boiler efficiency, can be through energy-saving technological transformation, to improve the thermal efficiency of the boiler, to achieve energy saving. b. Installation of climate compensation automatic control system to tap the energy-saving potential. c. Realize time division and zone heating according to different needs of schools and institutions and enterprises to reduce unnecessary consumption of energy. d. Solve the problem of uneven heating and cooling of the heating pipe network and unbalanced heating. e. Solve the problem of circulating water pump matching surplus is too large, resulting in electrical energy loss. Xie Zhehui gas boiler energy-saving transformation advantages: 1) the use of environmental climate compensation technology, through the collection of outdoor temperature, can be set at any time in accordance with the heating parameters set in the machine, to achieve automatic control of the system water supply temperature. It has changed the passive situation of relying on manual operation and experience judgment in the past. 2) According to the nature of the use of each building in the heating area, the installation of regulating devices at the entrance of each building, realizing the time-division heating, in the case of no one office in the building or non-normal use of time, automatic control of the supply flow, the appropriate reduction of indoor temperature, reducing unnecessary consumption of energy. 3) Improve the thermal efficiency of the boiler, take in the boiler total water inlet and total water outlet trunk pipe with the addition of a bypass pipe and electric regulator to regulate the boiler water flow. After the transformation, it ensures that the boiler always operates under high temperature water and high efficiency, which saves fuel, and at the same time reduces the corrosion of boiler condensate on the boiler and prolongs the service life of the boiler. 4) Strengthening combustion, optimizing heat preservation measures and adjusting the resistance coefficient and wind-coal ratio to achieve rapid and full combustion of coal in the furnace chamber. Through the inverted herringbone back arch, the formation of the throat, can increase the oxygen content of the upper part of the furnace, to promote the full combustion of blown coal dust and carbon and oxygen compounds, and make the high-temperature flue gas in the furnace chamber disturbed rotating, so that a part of the coal ash reflux in the furnace, reduce the convection surface of the accumulation of ash, reduce the emission of smoke and dust, not only to save coal, but also to reduce environmental pollution, the economic and social benefits are significant.