Manufacturing method of flowerpot

The manufacturing method of the flowerpot is as follows:

Material: wood, characters, stones.

1. First, prepare a piece of wood and peel off the bark with an angle grinder.

2. Sand the trunk with sandpaper and clean the sawdust with a brush.

3. First drill holes in the wood with an electric drill, and then trim them with a hammer and chisel.

4. Grind the inside and outside of the flowerpot with a grinder; Brush with varnish or paraffin oil.

5. After the paint is completely dried, plant plants in the planting tank.

6. If there is much meat, it is recommended to fill 70% granular soil.

flower pot

Flower pot (English name: flowerpot) is a kind of vessel for planting flowers, mostly in the shape of an inverted frustum or an inverted pyramid with a big mouth and a small bottom. Flower pots come in various forms and sizes. Flower producers or flower growers can choose flowerpots according to the characteristics and needs of flowers and the characteristics of flowerpots, and flowerpots can be divided into many kinds according to different materials.

Flower pots are pot-shaped utensils used in private gardens and villas, which are widely used in landscaping and landscape engineering, among which pottery pots have the most artistic effect. According to China's only definition, a flowerpot is a pot-shaped container made of clay, porcelain, plastic, stone and wood products. Mainly used for landscaping, landscape greening, private gardens and community greening.

The easiest way to make your own flowerpot:

1, canned

Flower pots can be made of cans. At this time, open the bottle body of the can with a knife and poke 3-5 small holes at the bottom, which is beneficial to the discharge of soil water. Then, tie the pull ring with a string and hang the cans on the wall. Finally, plant copper grass or green radish in it.

2, laundry liquid bottle

When making flowerpots with laundry liquid bottles, first clean the laundry liquid bottles to prevent the residual laundry liquid from affecting the normal growth of roots, then trim the desired shape with scissors, and finally punch holes in the bottom of the laundry liquid bottles and add soil to get flowerpots with unique shapes.

3. Glass wine bottle

You can also make flowerpots out of glass wine. At this point, the iron wire is wound around the cutting part, and then the iron ring is burned to red and covered on the glass wine bottle. After waiting for 30 seconds, wash the wine bottle with cold water, so that the wine bottle is divided into two halves according to the cutting marks, and then take off the half part to fill the soil and plant flowers.

4. Coconut shell

Coconut shells are large in shape, hard in texture and waterproof, and are one of the ideal materials for homemade flowerpots. At this time, cut the top of the coconut shell with a sharp gardening knife, punch 1-2 filter holes in the bottom, then fill in moist and fertile soil and plant hanging flowers such as chlorophytum and ivy.