The United States floor fan how to remove the United States floor fan removal method

1, first of all, we need to divide the floor fan into two sections, the screws connecting the base and fan motor position unscrewed. The screw is just below the power cord, remember to lift the cord when screwing.

2, after unscrewing the screws, force the upper and lower sections to tear apart, may be used for a long time, need to use a little force Oh.

3, then we come to remove the base, the base inverted, you can see the bottom center has a round rotary switch, counterclockwise unscrew.

4, unscrewed, this time the four sides of the foot is unfolding state, here we also need to pull outward, one side of the pull once.

5, the four feet closed, like 1 robot.

6, there is, the base of the height adjustment bar needs to be indented, also need to adjust the knob, after adjustment, the bar will naturally go in.

7, well, the next to the upper part of the fan, as the fan itself is fixed by the screw circle around, you need to loosen the screws, do not have to completely unscrew it.

8, after loosening the screws, break the fan cover outward, it comes out easily.

9, at this time, revealing the fan blade, there is a knob above, the knob needs to be unscrewed clockwise.

10, unscrew the knob to take down the fan blade, there is a knob at the bottom, fixed fan bottom, the knob is normal counterclockwise rotation down.

11, finally, take down the bottom cover, so that we will be the whole fan completely disassembled. Remember to clean it before sealing.