Installation steps of decorative glass partition wall of Beijing Jingfuren in Tianjin Huafu Home Experience Hall

Step 1: Stick it on the bottom of the absorption ground rail with double-sided adhesive, then put the ground rail in a fixed position and fix it with expansion plugs and nails.

Step 2: The main keel is perpendicular to the ground rail and hits the ceiling.

Step 3: Insert the main keel connector into the ground rail and the main keel, connect them well, and then fix them with jacking wires.

Step 4: Insert the ground support into the ground rail, place wood squares (6 cm wide× 3 cm high) on both sides of the ground support, and then insert glass strips on both sides of the glass gusset plate.

Then use the glass gusset plate to buckle on the ground support, and then buckle the glass gusset plate on the main keel.

Step five:

Put the glass on the block and fasten it with the buckle.

Step 6:

Insert the rubber strip door frame into a fixed position, and then fasten the door frame on the main keel.

Insert the door frame beam into the right angle joint of the door frame and connect it with the vertical door frame.