What's the difference between ultraviolet lamp and ultraviolet mosquito killer?

1, with different properties: ultraviolet lamp is a device that can emit ultraviolet rays, a necessary tool to observe the fluorescence and phosphorescence characteristics of samples, and a physical means of sterilization and disinfection. According to the living habits of mosquitoes, ultraviolet mosquito killer is a simple and practical mechanical device, which lures mosquitoes by releasing light beam chemicals, and then catches mosquitoes by negative pressure device.

2. Different wavelengths: the wavelength of the ultraviolet lamp is in the range of 10~400nm. The band of ultraviolet mosquito killer is 320-375nm, and the ideal band is 365nm.

3, different uses: the biggest role of ultraviolet lamp is disinfection and sterilization, using radiation to kill bacteria in the air. It is necessary to use a time tube or a glass tube to transmit light so as not to weaken. Ultraviolet mosquito killer mainly kills mosquitoes.

Extended data:

Matters needing attention in using ultraviolet mosquito killer:

1, before use, be sure to check whether the voltage and frequency are consistent with the product, and use the power socket consistent with the product. The grounding wire of the socket must be well grounded. When you turn on the power switch and see the purple light in the lamp tube, the work of killing flies and mosquitoes has already begun.

2. The usable area is 50m2~60m2 indoors and 100m2 outdoors. When using it for the first time, it is best to close the doors and windows or screen doors in the evening when it is just dark, turn off the lighting and leave, and concentrate on killing mosquitoes for 2 ~ 3 hours. People go back indoors and don't stop until the next morning. 1 ~ 2 weeks. In summer or during mosquito activities, it can be used every day to eliminate mosquitoes that leak into the room due to lax doors and windows.

3. After using for a period of time, when you see more mosquito and fly residues accumulated on the base below the lamps, you should clean them up in time. When cleaning, be sure to cut off the power supply first, hold the insulation part of the screwdriver, use the metal rod of the screwdriver to disconnect and discharge the contact between the two network wires of the power grid, then press the outer net with two thumbs, take out the rear net and take out the chassis for cleaning.

Baidu encyclopedia-mosquito killer

Baidu encyclopedia-ultraviolet lamp