How to make a bamboo door?

Materials to be prepared: bamboo, wooden board, wooden stick, tape measure, nail, saw, iron wire, machete.

First measure the length, width and height of the door with a tape measure. Measure the size of the bamboo door you need, and then make the bamboo door according to your measured size.

First, use a saw to cut out the required bamboo, then use a machete to split the bamboo into two symmetrical halves, and then clean everything in the middle, so that the bamboo becomes a bamboo board.

Then cut some slender bamboo strips with a machete. Saw the board to the same height and width as the bamboo board.

Put all the wooden boards and bamboo boards on the ground and splice them together with iron wires and small bamboo strips. Make it have a general shape, the general shape of a bamboo door.

Then nail the wooden board and bamboo board together. Then fix and reinforce with iron wire.

Note: Be careful not to be scratched when using these tools.

Simple bamboo door

Zhumen introduction

Bamboo board indoor doors are made of natural bamboo and refined through a series of about 35 processing techniques. Bamboo doors are divided into bamboo door and bamboo board door, and bamboo board door is a density board door after bamboo branches and roots are crushed and pressed; Bamboo door is a kind of low-carbon environmental protection door made of bamboo, similar to solid wood door. It has the advantages of no deformation, no cracking and good quality.