Traditional Culture Encyclopedia - Traditional virtues - Assembled cabinet door can not match the eyelet how to do

Assembled cabinet door can not match the eyelet how to do

Assembly of the door of the wardrobe is not the door eye can be adjusted hinges , or measure the size of the same.

Wardrobe door is generally not flush by the hinge tightness problems caused by the hinge, you can try to adjust it, if it does not work suggest that a hinge can be changed.

Wardrobe door is not aligned, first of all, you have to use the box ruler to measure the size of the door is not the same, if the size is the same, then it is the problem of hinges, general hinges are adjusted to the two screws outside the most is to adjust the size of the door gap, you can use a screwdriver, depending on the circumstances of the adjustment.

Basic Installation Steps for Wardrobe

One, the goods unpacking

After receiving the goods, the first thing to check is to check whether the packaging is intact, and the second unpacking after the installation of schematic diagrams to confirm that the closet door panels cabinets and various components are complete.

Second, the installation of the cabinet

In the assembly process of the cabinet, is to take the face down back up method of assembly, encountered in front of the cabinet body has a vacant position, should be the first to install the internal structure of the bottom of the pad in front of the height of the vacant position of the items, such as cabinet footboard or closing plate, and then assembled the external panels, and finally install the cabinet foot line.

Three, the installation of the cabinet door

1, the scene to open the packaging, the first inspection of the product has no obvious damage and defects.

2, with a level meter to measure the ground level, if it is not flat, you can place a large board on the ground, with a small piece of wood or paper to level it.

3, the door plate flat on top of it, to see if there is no warping deformation.