Knowledge of garden rockery construction?

The construction at the foot of rockery is the initial part of mountain construction, and the main work includes pulling the bottom, lifting the foot and building the foot. These three parts are closely related. The so-called bottoming is to build the first layer of rock within the footline, that is, to make the bottom rock. See the following brief description for the way of bottom drawing and the treatment of bottom bottom line. First, there are two ways to pull the bottom: rockery and left and right. 1. Manradi is paved with rocks within the footline. This bottom pulling method is suitable for rockeries with small scale and small bottom area, or rockeries with frost heaving damage in winter in the north. 2. The bottom pulling around is to build a circle of bottom stones with stones along the foot of the rockery, and then fill all the stone circles with rubble or soil, which becomes the bottom layer of the rockery after compaction. This method is suitable for large rockery with large basement area. Second, the foot line therapy 1. Expose your feet: it means to directly circle the stepping stone of the foot line on the ground, so that the whole rockery seems to be placed on the ground. This method can reduce the amount of stones and labor, but the rockery effect at the foot of the mountain will be worse. 2. Burying feet: The bottom stones around the foot of the mountain are buried about 20 cm under the soil, which can make the whole rockery look like it grows from the ground. After planting flowers and plants in the soil next to the stone, the combination between the rockery and the ground will be closer and more natural. Third, technical requirements First of all, we must pay attention to choosing suitable rocks for the bottom of the mountain, and we must not use excessively weathered loose rocks. Secondly, the bottom of the rock must be flat and stable, and it can't shake, so that the mountain can be built upwards. Third, the stones in Ladurie should be closely linked and bite each other. Fourth, the rocks are irregular and intermittent, with fractures and connections. Fifth, the edge of the bottom should be changed at will, so that the foot of the mountain has different radii when it is bent, and different concave depths and widths when it is depressed, so as to avoid the straight circular shape of the foot of the mountain.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd