How to solve the Cruze fault code: P2 135?

Solution: firstly, eliminate the connection problem between the plug of throttle body position sensor and the wiring harness; Make sure the line connection is reliable.

If the fault cannot be eliminated, replace the throttle position sensor; If replacing the throttle position sensor still doesn't work, try to replace the newly obtained throttle body.

P2 135 fault code refers to the voltage-related fault of throttle valve, accelerator pedal position sensor and switch a/b.

In the throttle control system, the function of the accelerator pedal sensor is to transmit the position of the accelerator pedal to the throttle control system in the form of electric signal, and the throttle will control the throttle switch according to the transmitted signal, which is an important basis for controlling the throttle switch.

Every time you drive, you should form good habits and carefully check the safety of the vehicle.

1, check whether the vehicle oil, brake oil, gasoline and cooling water are normal; Whether there is leakage.

2, check whether the vehicle braking system is in good condition and effective; Whether the air pump and air storage tank are leaking; Whether the tire pressure is normal; Whether the tire fastening screws are loose; Whether the spare tire is intact.

3. Check whether the vehicle direction light, brake indicator light, lighting lamp, wiper and horn are normal.

4, check whether the vehicle steering system is in good condition and reliable.

5. Record the inspection situation, report and repair the problems in time, and it is strictly forbidden to have "sick cars".