How to make gloves? Simple manual method

Tools/materials for making gloves by hand

Wool blended felt cloth (size 1/3 or 4 sheets of 9* 12)

Cotton cover (equivalent to felt cloth)

Decorative cloth strip (about 12 inch)

Wool with decorative strips

Methods/steps

According to the template of mittens, the felt cloth and cotton cloth are cut into four glove shapes with the same size, and the national decorative strips with the same width as the gloves are cut, fixed with needles according to the figure, and then wound on the felt cloth. If you sew wool on the outside, it is difficult to see the traces of sewing.

Repeat the same steps on the second felt cloth, but pay attention to the opposite pattern of the cloth strips, so as to have the effect of a pair of gloves. It is enough to have a piece of cloth on one side of the glove, but it can also be sewn on all sides.

Fix each felt cloth and a cotton cloth with a needle, sew the two cloths along the edge with ordinary thin thread, and sew a small edge with black thread at the bottom. Turn the sewn two glove cloths upside down, fix them with a needle, and sew the edges with a sewing machine. The width of the seam should be slightly away from the edge, about 1/4 inch.

After sewing, trim the edges neatly and remove the surrounding wool. Turn the gloves over. If it is a little big, you can turn it over and sew it inside, but you must leave enough space for the glove mouth, otherwise the glove will not be brought in.